//-------------------------------------------------------------------------------
// File Name:	config.h
// Brief: 
// Version:		1.1.0
// Create Date: 2021/07/20
// Create by: 	Marshal Lee
// Copyright: 
//				Copyright (c)  2021, Richpeace Co., LTD.
//				All rights reserved.
//
// Modify by:	Marshal Lee
// Modify Date:	2021/07/20
//-------------------------------------------------------------------------------

#ifndef __CONFIG_H__
#define	__CONFIG_H__

#include "afxdef.h"
//---------------------------------------------------------------
//
// 板卡配置
//---------------------------------------------------------------

#define	CORE_BOARD_APP			1		// 应用代码

#define CUR_CORE_BOARD			CORE_BOARD_APP

//---------------------------------------------------------------

#define	VERSION_DEBUG		0	// 调试版本
#define	VERSION_RELEASE		1	// 发布版本

#define	CUR_VERSION		VERSION_DEBUG

//---------------------------------------------------------------


//---------------------------------------------------------------

#define	VER_CODE_M	'2','4'
#define	VER_CODE_S	'1','0'
#define	VER_CODE_D	'1','7'

//---------------------------------------------------------------

// 板卡用途

#define TEST_BOARD			0		// 测试架

#define SEW_HEAD			1			// 缝纫机头板

#if (CUR_CORE_BOARD	== CORE_BOARD_APP)
#define BOARD_USE_FOR		SEW_HEAD
#else
#define BOARD_USE_FOR		TEST_BOARD
#endif

//---------------------------------------------------------------

#define	USE_IWDOG			0	// 使用看门狗

//---------------------------------------------------------------
#if (BOARD_USE_FOR == SEW_HEAD)
#define RS485_CMD_NUM		21
#endif
//---------------------------------------------------------------

#ifndef 	SYSCLK
#define		SYSCLK		72000000L
#endif

//---------------------------------------------------------------

// bootloader 大小
#define	STM32_BOOT_SIZE		(0*1024)

#define	VERSION_LEN			32


//---------------------------------------------------------------

// 通讯端口选择

#if (1)		// 通讯端口选择

#define	COMM_NONE			0		// 不使用，无效

#define	COMM_USART1			1		// 串口1,
#define	COMM_USART2			2		// 串口2, 485
#define	COMM_USART3			3		// 串口3, 485

#define	CONSOLE_PORT		COMM_USART1			// 控制台通讯口
 
#define USART2_485OutEn		SetEn485OutOff
#define USART2_485OutDis	SetEn485OutOn

#define USART3_485OutEn		SetEn485_2_OutOff
#define USART3_485OutDis	SetEn485_2_OutOn

#define COMM_485 	1
#define COMM_CAN 	2

#define CONTROL_BUS		COMM_CAN

#endif

//---------------------------------------------------------------
#if (CONTROL_BUS == COMM_485)
#define 	MODBUS_S_PORT
#elif (CONTROL_BUS == COMM_CAN)
#define 	CUR_EXA1_NODE_ID		0x21
#define 	BN_DEVICE_EXA1			0xA1
#endif
//---------------------------------------------------------------
#if (BOARD_USE_FOR == SEW_HEAD)
#define		MODBUS_M
#endif
//---------------------------------------------------------------

//---------------------------------------------------------------

#define		STM32_SOFT_PWM				1

#define 	STM32_MOTOS_NUM				1
#define		MOTO1_TIM					TIM1

#define		SPEED_PSC					48

#define		MOOT_TIM_PSC				80

//---------------------------------------------------------------
#if (BOARD_USE_FOR == SEW_HEAD)
#define PWM_TIMER_CTRL	1
#endif
//---------------------------------------------------------------

#if (BOARD_USE_FOR == SEW_HEAD)
	#define	VER_TYPE	'S','E','W'
	#define	VER_PROD	'H','E','A','D',' '
#else
	#define	VER_TYPE	'Y','R','A'
	#define	VER_PROD	'D','3','2',' ',' '
#endif
//---------------------------------------------------------------

void GetVersionStr(char * str);
void GetBuildStr(char * str);

//---------------------------------------------------------------

//---------------------------------------------------------------

#include "main.h"

#endif