en to unknown language translation catalogue (944 entries)

[ctx: BrokenLineDialog]
en: Broken Line Prompt
target: Thread-break Prompt

[ctx: BrokenLineDialog]
en: Current color order:
target: Current color:

[ctx: BrokenLineDialog]
en: Cys
target: Cycle

[ctx: BrokenLineDialog]
en: First
target: First Row

[ctx: BrokenLineDialog]
en: Rst
target: Reset

[ctx: BrokenLineDialog]
en: Single
target: SingleRow

[ctx: ColorOrderSetWidget]
en: Begin needle:
target: Begin Stitch qty:

[ctx: ColorOrderSetWidget]
en: Chain (C):
target: Chain-stitch (C):

[ctx: ColorOrderSetWidget]
en: Coil (W):
target: Coiling (W):

[ctx: ColorOrderSetWidget]
en: Coil function description
target: Coiling function description

[ctx: ColorOrderSetWidget]
en: Color num:
target: Current Color:

[ctx: ColorOrderSetWidget]
en: Color order setting is unreasonable, please reset!
target: Color setting is unreasonable, please reset!

[ctx: ColorOrderSetWidget]
en: End needle:
target: End stitch:

[ctx: ColorOrderSetWidget]
en: High
target: Height

[ctx: ColorOrderSetWidget]
en: High index:
target: Height index:

[ctx: ColorOrderSetWidget]
en: High value:
target: Height value:

[ctx: ColorOrderSetWidget]
en: Needle
target: Needle Bar

[ctx: ColorOrderSetWidget]
en: Needle:
target: Needlebar choose:

[ctx: ColorOrderSetWidget]
en: Non needle step
target: Non stitch step

[ctx: ColorOrderSetWidget]
en: Ribbon (R):
target: Tape-emb (T):

[ctx: ColorOrderSetWidget]
en: Ribbon function description
target: Tape-emb function description

[ctx: ColorOrderSetWidget]
en: Sawtooh function description
target: Zigzag function description

[ctx: ColorOrderSetWidget]
en: Sawtooth (Z):
target: Zigzag (Z):

[ctx: ColorOrderSetWidget]
en: Total color:
target: Total colors:

[ctx: ColorOrderSetWidget]
en: Total high Num:
target: Total heights:

[ctx: ColorOrderSetWidget]
en: Total needle:
target: Total stitches:

[ctx: ColorOrderSetWidget]
en: Towel high:
target: Chenille height:

[ctx: ColorOrderSetWidget]
en: W1: Left-handed 1; W2: Left-handed 2; W3: Left-handed 3; W4:Left-handed 4;W5:Right-handed 1;W6:Right-handed 2;W7:Right-handed 3;W8:Right-handed 4;W9:Winding plain embroidery
target: W1: Left-rotated 1; W2: Left-rotated 2; W3: Left-rotated 3; W4:Left-rotated 4;W5:Right-rotated 1;W6:Right-rotated 2;W7:Right-rotated 3;W8:Right-rotated 4;W9:Coiling flat emb

[ctx: ColorOrderSetWidget]
en: Z1: Each needle swings once; Z2: The same as Z1, with additional embroidery frame compensation;Z3: The needle will swing when it is dropped in place, and the needle will not swing when it is inserted; Z4: One swing per needle and one swing per three needles alternately; Z5: The needle will swing when it is dropped in place, and the needle will not swing when it is inserted; Z6: Swing once every two stitches
target: Z1: Swing per stitch; Z2: Same as Z1, additional emb. frame compensation;Z3: Swing per two stitches drop, and no swing for stitch in; Z4: One swing per stitch and One swing per three stitches alternately; Z5: Swing per stitch drop, and no swing for stitch in; Z6: One swing per two stitches

[ctx: FlatEmbroidery]
en: 1 sequined size of the left
target: 1st sequin size at left

[ctx: FlatEmbroidery]
en: 1 sequined size of the right
target: 1st sequin size at right

[ctx: FlatEmbroidery]
en: 13 needle position
target: 13th needle position

[ctx: FlatEmbroidery]
en: 14 needle position
target: 14th needle position

[ctx: FlatEmbroidery]
en: 15 needle position
target: 15th needle position

[ctx: FlatEmbroidery]
en: 2 sequined size of the left
target: 2nd sequin size at left

[ctx: FlatEmbroidery]
en: 2 sequined size of the right
target: 2nd sequin size at right

[ctx: FlatEmbroidery]
en: 3 sequined size of the left
target: 3rd sequin size at left

[ctx: FlatEmbroidery]
en: 4 sequined size of the left
target: 4th sequin size at left

[ctx: FlatEmbroidery]
en: 5 sequined size of the left
target: 5th sequin size at left

[ctx: FlatEmbroidery]
en: 6 sequined size of the left
target: 6th sequin size at left

[ctx: FlatEmbroidery]
en: 7 sequined size of the left
target: 7th sequin size at left

[ctx: FlatEmbroidery]
en: 8 sequined size of the left
target: 8th sequin size at left

[ctx: FlatEmbroidery]
en: ;Toweling:
target: ;Chenille:

[ctx: FlatEmbroidery]
en: Action
target: Control Action

[ctx: FlatEmbroidery]
en: Advance speed needle
target: Advance deceleration stitches

[ctx: FlatEmbroidery]
en: Air frame opening and closing delay
target: Air frame open-close delay

[ctx: FlatEmbroidery]
en: Air pressure safety input allows
target: Air pressure safety input Enable

[ctx: FlatEmbroidery]
en: AllToZero
target: All zeroing

[ctx: FlatEmbroidery]
en: Auto closing air box allows
target: Auto closing air frame Enable

[ctx: FlatEmbroidery]
en: AutoShuttle
target: Automatic Bobbin Change(ABC)

[ctx: FlatEmbroidery]
en: Automatic shuttle change alarm
target: ABC alarm

[ctx: FlatEmbroidery]
en: Automatic shuttle changing device
target: ABC device

[ctx: FlatEmbroidery]
en: Automatic soft limit finish
target: Auto soft limit finish

[ctx: FlatEmbroidery]
en: Automatically fix the stitch point
target: Auto Set emb start point

[ctx: FlatEmbroidery]
en: AxleJog
target: Main-shaft Jog

[ctx: FlatEmbroidery]
en: AxleRotate
target: Main-shaft Rotate

[ctx: FlatEmbroidery]
en: AxleTest
target: Main-shaft Test

[ctx: FlatEmbroidery]
en: BeadPara
target: Bead parameters

[ctx: FlatEmbroidery]
en: Boot sequin zero
target: Boot sequin zeroing

[ctx: FlatEmbroidery]
en: Border
target: Simulate frame

[ctx: FlatEmbroidery]
en: Border embroidery stop
target: Border embroidery done

[ctx: FlatEmbroidery]
en: BorderEmb
target: Border Emb

[ctx: FlatEmbroidery]
en: Bottom line color synchronization
target: Bobbin and Upper color synchronization

[ctx: FlatEmbroidery]
en: Bottom thread correction amount per stitch for flat embroidery
target: Flat Emb. bobbin thread correction amt. per stitch

[ctx: FlatEmbroidery]
en: Broken line stop
target: Thread-break stop

[ctx: FlatEmbroidery]
en: Bullet motor alarm
target: Bead motor alarm

[ctx: FlatEmbroidery]
en: Cap frame in place detection allowed
target: Cap frame in-place detection Enable

[ctx: FlatEmbroidery]
en: Carve hole needle
target: Boring needle

[ctx: FlatEmbroidery]
en: Carving hole offset
target: Boring offset-amt

[ctx: FlatEmbroidery]
en: Carving hole offset allows
target: Boring offset Enable

[ctx: FlatEmbroidery]
en: Chain bit
target: Chain-stitch position

[ctx: FlatEmbroidery]
en: Chain starting deviation angle of ring striking
target: Chain-stitch working height gear

[ctx: FlatEmbroidery]
en: Chain working height
target: Chain-stitch working height

[ctx: FlatEmbroidery]
en: ChangeC
target: Manual Color-change

[ctx: FlatEmbroidery]
en: CheckFrame
target: Border check

[ctx: FlatEmbroidery]
en: Chen Color change start method
target: Chenille Color change start mode

[ctx: FlatEmbroidery]
en: Chen FrameX Negative Limit
target: Chenille FrameX Neg. Limit

[ctx: FlatEmbroidery]
en: Chen FrameX Zero
target: Chenille FrameX Zero

[ctx: FlatEmbroidery]
en: Chen FrameY Negative Limit
target: Chenille FrameY Neg. Limit

[ctx: FlatEmbroidery]
en: Chen FrameY Zero
target: Chenille FrameY Zero

[ctx: FlatEmbroidery]
en: Chen M axis zero position
target: Chenille M-ax.zero position

[ctx: FlatEmbroidery]
en: Chen frameX positive limit
target: Chenille frameX Pos. limit

[ctx: FlatEmbroidery]
en: Chen frameY positive limit
target: Chenille frameY pos. limit

[ctx: FlatEmbroidery]
en: Chen ring shaft zero position
target: Chenille loop-shaft zero position

[ctx: FlatEmbroidery]
en: Chenille Disconnection detection prohibited
target: Chenille thread-break detect. disable

[ctx: FlatEmbroidery]
en: Chenille M-axis zero compensation
target: Chenille M-axis zero offset

[ctx: FlatEmbroidery]
en: Chenille Needle Bar quantity
target: Chenille Needle Bar qty

[ctx: FlatEmbroidery]
en: Chenille Overhead board upgrade
target: Chenille headboard upgrade

[ctx: FlatEmbroidery]
en: Chenille bit
target: Chenille position

[ctx: FlatEmbroidery]
en: Chenille chain type same color without thread cutting
target: No thread-trim for same color at chenille and chainstitch

[ctx: FlatEmbroidery]
en: Chenille head lift allows
target: Chenille head lift Enable

[ctx: FlatEmbroidery]
en: Chenille moving frame maximum speed limitt
target: Chenille moving frame max. speed limit

[ctx: FlatEmbroidery]
en: Chenille oil
target: Chenille oiling

[ctx: FlatEmbroidery]
en: Chenille ring shaft
target: Chenille looping shaft

[ctx: FlatEmbroidery]
en: Chenille ring shaft zero compensation
target: Chenille loop shaft zero compensation

[ctx: FlatEmbroidery]
en: Chenille starting deviation angle of ring striking
target: Chenille looping start deviation angle

[ctx: FlatEmbroidery]
en: Chenille top line displacement
target: Chenille thread clip open displacement

[ctx: FlatEmbroidery]
en: Chenille trimmer off-line allowed
target: Chenille trimmer off-thread Enable

[ctx: FlatEmbroidery]
en: Chenille trimming allowed
target: Chenille trimming Enable

[ctx: FlatEmbroidery]
en: Chenille working height
target: Chenille working height gear

[ctx: FlatEmbroidery]
en: ChenilleFun
target: Chenille Debug

[ctx: FlatEmbroidery]
en: Cioil M disconnection stop and return to zero
target: Coiling M-axis thread-break to stop and zero

[ctx: FlatEmbroidery]
en: Cioil M normal stop and return to zero
target: Coiling M-axis normal stop and zero

[ctx: FlatEmbroidery]
en: Cioil M pull rod to stop and return to zero
target: Coiling M-axis bar-pull to stop and zero

[ctx: FlatEmbroidery]
en: Close
target: OFF

[ctx: FlatEmbroidery]
en: Coil M axis
target: Coiling M axis

[ctx: FlatEmbroidery]
en: Coil M spindle is not at the zero position
target: Coiling M spindle is not at the zero position

[ctx: FlatEmbroidery]
en: Coil M-axis rotation duration angle
target: Coiling M-axis rotation duration angle

[ctx: FlatEmbroidery]
en: Coil M-axis rotation start angle
target: Coiling M-axis rotation start angle

[ctx: FlatEmbroidery]
en: Coil M-axis zero position
target: Coiling M-axis zero position

[ctx: FlatEmbroidery]
en: Coil Spindle
target: Coiling Spindle

[ctx: FlatEmbroidery]
en: Coil head board parameters
target: Coiling head board parameters

[ctx: FlatEmbroidery]
en: Coil head offset X
target: Coiling head offset X

[ctx: FlatEmbroidery]
en: Coil head offset Y
target: Coiling head offset Y

[ctx: FlatEmbroidery]
en: Coil jump needle change the number of frame
target: Coiling jump-stitch frame-changing stitches

[ctx: FlatEmbroidery]
en: Coil mode maximum speed
target: Coiling mode max. speed

[ctx: FlatEmbroidery]
en: Coil presser foot
target: Coiling presser foot

[ctx: FlatEmbroidery]
en: Coil presser foot motor
target: Coiling presser foot motor

[ctx: FlatEmbroidery]
en: Coil sawtooth
target: Coiling zig-zag

[ctx: FlatEmbroidery]
en: Coil sawtooth motor
target: Coiling zig-zag motor

[ctx: FlatEmbroidery]
en: Coil spindle is not at the zero position
target: Coiling spindle is not at the zero position

[ctx: FlatEmbroidery]
en: Coil spindle maximum speed
target: Coiling spindle max. speed

[ctx: FlatEmbroidery]
en: Coil spindle working speed
target: Coiling spindle working speed

[ctx: FlatEmbroidery]
en: Coil trimming method
target: Coiling trimming method

[ctx: FlatEmbroidery]
en: Coil workable area (X+)
target: Coiling workable area (X+)

[ctx: FlatEmbroidery]
en: Coil workable area (X-)
target: Coiling workable area (X-)

[ctx: FlatEmbroidery]
en: Coil workable area (Y+)
target: Coiling workable area (Y+)

[ctx: FlatEmbroidery]
en: Coil workable area (Y-)
target: Coiling workable area (Y-)

[ctx: FlatEmbroidery]
en: CoilFace
target: Coiling upper-thread detect

[ctx: FlatEmbroidery]
en: CoilM
target: Coiling M axis angle

[ctx: FlatEmbroidery]
en: CoilPara
target: Coiling Para

[ctx: FlatEmbroidery]
en: CoilUnder
target: Coiling bobbin thread detect

[ctx: FlatEmbroidery]
en: Coli Color change start method
target: Coiling Color change start method

[ctx: FlatEmbroidery]
en: Coli set working area
target: Coiling set working area

[ctx: FlatEmbroidery]
en: Collision continues
target: Oiling last time

[ctx: FlatEmbroidery]
en: Color
target: Color Sequence

[ctx: FlatEmbroidery]
en: Color change
target: Color-change position

[ctx: FlatEmbroidery]
en: Completion angle of loose bead
target: Bead out completion angle

[ctx: FlatEmbroidery]
en: Continuous angle of EMB movable frame
target: EMB frame-moving duration angle

[ctx: FlatEmbroidery]
en: Counting the number of shuttles for EMB
target: Flat emb. bobbin change counting

[ctx: FlatEmbroidery]
en: Ctrl1
target: Swing bit 1

[ctx: FlatEmbroidery]
en: Ctrl2
target: Swing bit 2

[ctx: FlatEmbroidery]
en: Current position:0;Starting point:2;Offset position:4
target: Current position:0;Start point:2;Offset position:4

[ctx: FlatEmbroidery]
en: CutPara
target: TrimPara

[ctx: FlatEmbroidery]
en: Default:0;1color:1;2color:2;3color:3;4color:4;5color:5;6color:6;7color:7;8color:8
target: Default:0;color1:1;color2:2;color3:3;color4:4;color5:5;color6:6;color7:7;color8:8

[ctx: FlatEmbroidery]
en: Delay speed needle
target: Delay Accel. Stitch

[ctx: FlatEmbroidery]
en: Delete
target: Delete Pattern

[ctx: FlatEmbroidery]
en: Disconnection detection duration
target: Thread-break detection duration

[ctx: FlatEmbroidery]
en: Disperse bead feeding
target: Beads feeding

[ctx: FlatEmbroidery]
en: Duration of refueling for rotary shuttle
target: Rotary hook oiling duration

[ctx: FlatEmbroidery]
en: Dust interval
target: Dusting hours interval

[ctx: FlatEmbroidery]
en: Dust removal duration
target: Dusting duration

[ctx: FlatEmbroidery]
en: Dust removal needle interval
target: Dusting stitches interval

[ctx: FlatEmbroidery]
en: EMB Overhead board upgrade
target: EMB head board upgrade

[ctx: FlatEmbroidery]
en: EMB bottom thread length
target: EMB bobbin thread length

[ctx: FlatEmbroidery]
en: EMB dynamic cut line hook out angle
target: Hook out angle in EMB dynamic thread-trim

[ctx: FlatEmbroidery]
en: EMB dynamic cut line release angle
target: EMB dynamic thread-trim release angle

[ctx: FlatEmbroidery]
en: EMB dynamic shear clip line angle
target: Thread-clamp angel in EMB dynamic thread-trim

[ctx: FlatEmbroidery]
en: EMB dynamic shear line distribution angle
target: Thread-distribute angel in EMB dynamic thread-trim

[ctx: FlatEmbroidery]
en: EMB dynamic thread trimming angle
target: Thread-buckle angel in EMB dynamic thread-trim

[ctx: FlatEmbroidery]
en: EMB hook contraction
target: EMB thread-hooking contraction

[ctx: FlatEmbroidery]
en: EMB hook test
target: EMB hookknife test

[ctx: FlatEmbroidery]
en: EMB jump needle change the number of frame
target: EMB jump-stitch frame-chaning stitches

[ctx: FlatEmbroidery]
en: EMB line broken return needles
target: EMB thread-break backward stitches qty

[ctx: FlatEmbroidery]
en: EMB lock test
target: EMB headlock test

[ctx: FlatEmbroidery]
en: EMB needle and thread clamp allowed
target: EMB thread clamping of start-stitch Enable

[ctx: FlatEmbroidery]
en: EMB rock limit
target: EMB bar-drop limit

[ctx: FlatEmbroidery]
en: EMB set working area
target: EMB working area

[ctx: FlatEmbroidery]
en: EMB spindle find zero compensation
target: EMB spindle zero compensation

[ctx: FlatEmbroidery]
en: EMB static cut line completion angle
target: EMB static thread-trim completion angle

[ctx: FlatEmbroidery]
en: EMB the needle buckle line allowed
target: EMB thread-buckling of start-stitch Enable

[ctx: FlatEmbroidery]
en: EMB thread trimming allowed
target: EMB thread-trim Enable

[ctx: FlatEmbroidery]
en: Elastic wire motor braking range proportion
target: Thread-tighten/loosen motor braking range ratio

[ctx: FlatEmbroidery]
en: Elastic wire motor movement timed out
target: Thread-tighten/loosen motor movement timed out

[ctx: FlatEmbroidery]
en: Elastic wire motor running speed
target: Thread-tighten/loosen motor running speed

[ctx: FlatEmbroidery]
en: Elastic wire motor starting speed
target: Thread-tighten/loosen motor start speed

[ctx: FlatEmbroidery]
en: Emb Change Color Pause
target: Same color pause in EMB color-change

[ctx: FlatEmbroidery]
en: Emb Disconnection detection prohibited
target: Emb thread-break detect. Disable

[ctx: FlatEmbroidery]
en: Emb lock type
target: Emb head-lock type

[ctx: FlatEmbroidery]
en: EmbHook
target: Emb Hook

[ctx: FlatEmbroidery]
en: Embroidery spindle circle
target: EMB spindle turns

[ctx: FlatEmbroidery]
en: Error reading palette parameters
target: Error color-changing board reading parameters

[ctx: FlatEmbroidery]
en: Export
target: Pattern Export

[ctx: FlatEmbroidery]
en: FaceDetect
target: UpperDetect

[ctx: FlatEmbroidery]
en: Failed to automatically set the stitch point
target: Auto set emb start point Failure

[ctx: FlatEmbroidery]
en: Feed is disappear err
target: No-feed Alarm

[ctx: FlatEmbroidery]
en: Feeding point coordinate valid flag
target: Valid feeding point coordinate

[ctx: FlatEmbroidery]
en: Flat embroidered sequins maximum speed
target: EMB sequin max. speed

[ctx: FlatEmbroidery]
en: Flat embroidery button line
target: EMB thread-buckle

[ctx: FlatEmbroidery]
en: Flat embroidery clip noodles
target: EMB upper thread-clamp

[ctx: FlatEmbroidery]
en: Flat embroidery color change timeout
target: EMB color change timeout

[ctx: FlatEmbroidery]
en: Flat embroidery cutter is not returning
target: EMB cutter not returns

[ctx: FlatEmbroidery]
en: Flat embroidery hook knife
target: EMB hook knife

[ctx: FlatEmbroidery]
en: Flat embroidery hook knife is not returning
target: EMB hook knife not returns

[ctx: FlatEmbroidery]
en: Flat embroidery lock
target: EMB head-lock

[ctx: FlatEmbroidery]
en: Flat embroidery needle position error
target: EMB needle position error

[ctx: FlatEmbroidery]
en: Flat embroidery oil
target: EMB oiling

[ctx: FlatEmbroidery]
en: Flat embroidery scissors
target: EMB scissors

[ctx: FlatEmbroidery]
en: Flat embroidery spindle
target: EMB spindle

[ctx: FlatEmbroidery]
en: FlatEmbroidery:
target: EMB:

[ctx: FlatEmbroidery]
en: GoOrBack
target: FW or BW

[ctx: FlatEmbroidery]
en: Hat embroidery in place
target: Cap Emb. in place

[ctx: FlatEmbroidery]
en: HeadEmb
target: Alternatehead

[ctx: FlatEmbroidery]
en: Hook automatic power off
target: Thread-hook automatic power off

[ctx: FlatEmbroidery]
en: Hook knife detection allows
target: Hook knife detection Enable

[ctx: FlatEmbroidery]
en: Hook moto acceleration
target: Thread-hook motor acceleration

[ctx: FlatEmbroidery]
en: Hook moto run frequency
target: Thread-hook motor work frequency

[ctx: FlatEmbroidery]
en: Hook moto start frequency
target: Thread-hook motor start frequency

[ctx: FlatEmbroidery]
en: Hook motor hook current
target: Thread-hook motor Thread-hooking current

[ctx: FlatEmbroidery]
en: Hook motor operation angle
target: Thread-hook motor running angle

[ctx: FlatEmbroidery]
en: Hook motor running current
target: Thread-hook motor work current

[ctx: FlatEmbroidery]
en: Hook motor segmentation
target: Thread-hook motor segmentation

[ctx: FlatEmbroidery]
en: Hook motor start skipping angle
target: Thread-hook motor start skipping angle

[ctx: FlatEmbroidery]
en: Hook motor stop current
target: Thread-hook motor stop current

[ctx: FlatEmbroidery]
en: Imposity 1 speed limit
target: Needle 1 speed limit

[ctx: FlatEmbroidery]
en: Imposity 10 speed limit
target: Needle 10 speed limit

[ctx: FlatEmbroidery]
en: Imposity 11 speed limit
target: Needle 11 speed limit

[ctx: FlatEmbroidery]
en: Imposity 12 speed limit
target: Needle 12 speed limit

[ctx: FlatEmbroidery]
en: Imposity 13 speed limit
target: Needle 13 speed limit

[ctx: FlatEmbroidery]
en: Imposity 14 speed limit
target: Needle 14 speed limit

[ctx: FlatEmbroidery]
en: Imposity 15 speed limit
target: Needle 15 speed limit

[ctx: FlatEmbroidery]
en: Imposity 2 speed limit
target: Needle 2 speed limit

[ctx: FlatEmbroidery]
en: Imposity 3 speed limit
target: Needle 3 speed limit

[ctx: FlatEmbroidery]
en: Imposity 4 speed limit
target: Needle 4 speed limit

[ctx: FlatEmbroidery]
en: Imposity 5 speed limit
target: Needle 5 speed limit

[ctx: FlatEmbroidery]
en: Imposity 6 speed limit
target: Needle 6 speed limit

[ctx: FlatEmbroidery]
en: Imposity 7 speed limit
target: Needle 7 speed limit

[ctx: FlatEmbroidery]
en: Imposity 8 speed limit
target: Needle 8 speed limit

[ctx: FlatEmbroidery]
en: Imposity 9 speed limit
target: Needle 9 speed limit

[ctx: FlatEmbroidery]
en: Increase motor braking acceleration
target: Lift-motor braking acceleration

[ctx: FlatEmbroidery]
en: Increase motor running speed
target: Lift-motor running speed

[ctx: FlatEmbroidery]
en: Increase motor start-stop acceleration
target: Lift-motor start-stop acceleration

[ctx: FlatEmbroidery]
en: Increase motor starting speed
target: Lift-motor starting speed

[ctx: FlatEmbroidery]
en: InternetofThings  configuration
target: IoT configuration

[ctx: FlatEmbroidery]
en: Is there an X-direction zero sensor
target: Is there X- zero sensor

[ctx: FlatEmbroidery]
en: Iterative way
target: Repeat Mode

[ctx: FlatEmbroidery]
en: Jump stitch overrun distance
target: Frame-changing distance of jump-stitch

[ctx: FlatEmbroidery]
en: Lack of material detection allows
target: Material-short detection Enable

[ctx: FlatEmbroidery]
en: Laser blow off delay
target: Laser airblow off delay

[ctx: FlatEmbroidery]
en: Laser blowing start delay
target: Laser airblow on delay

[ctx: FlatEmbroidery]
en: Laser start delay (light output delay)
target: Laser start delay (light out delay)

[ctx: FlatEmbroidery]
en: Lead Type
target: Thread-Tension Base

[ctx: FlatEmbroidery]
en: Left loose bead lifting
target: Left bead lifting

[ctx: FlatEmbroidery]
en: Left sequential color change motor
target: Left sequin color change motor

[ctx: FlatEmbroidery]
en: Left sequins slice
target: Left sequins cut

[ctx: FlatEmbroidery]
en: Lifting delay of bead dispersing device
target: Lifting delay of bead device

[ctx: FlatEmbroidery]
en: Lifting delay of sequin dispersing device
target: Lifting delay of sequin device

[ctx: FlatEmbroidery]
en: Lifting permission of non patching head sequin
target: Non-mending head sequin device lift Enable

[ctx: FlatEmbroidery]
en: Light curtain safety input allowed
target: Light curtain safety input Enable

[ctx: FlatEmbroidery]
en: LineEmb
target: Position line embroidery

[ctx: FlatEmbroidery]
en: LineOffset
target: StitchOffset

[ctx: FlatEmbroidery]
en: Lock head acceleration
target: Headlock motor accel

[ctx: FlatEmbroidery]
en: Lock head running speed
target: Headlock motor locking current

[ctx: FlatEmbroidery]
en: Lock motor acceleration
target: Headlock motor acceleration

[ctx: FlatEmbroidery]
en: Lock motor lock current
target: Headlock motor current

[ctx: FlatEmbroidery]
en: Lock motor operating angle
target: Headlock motor operating angle

[ctx: FlatEmbroidery]
en: Lock motor operation angle
target: Headlock motor operation angle

[ctx: FlatEmbroidery]
en: Lock motor run frequency
target: Headlock motor work frequency

[ctx: FlatEmbroidery]
en: Lock motor running current
target: Headlock motor work current

[ctx: FlatEmbroidery]
en: Lock motor segmentation
target: Headlock motor segmentations

[ctx: FlatEmbroidery]
en: Lock motor start frequency
target: Headlock motor start frequency

[ctx: FlatEmbroidery]
en: Lock motor start skipping angle
target: Headlock motor start skipping angle

[ctx: FlatEmbroidery]
en: Lock motor stop current
target: Headlock motor stop current

[ctx: FlatEmbroidery]
en: Lock needle step size
target: Lock stitch length

[ctx: FlatEmbroidery]
en: Lock needle steps
target: Locking stitches

[ctx: FlatEmbroidery]
en: Lock start speed
target: Headlock start speed

[ctx: FlatEmbroidery]
en: LockHead:0;LaserControl:1
target: HeadlockEM:0;LaserControl:1

[ctx: FlatEmbroidery]
en: Lowering minimum deviation angle
target: Deceleration minimum deviation angle

[ctx: FlatEmbroidery]
en: M-axis rotation maximum speed
target: M-axis rotation max. speed

[ctx: FlatEmbroidery]
en: M-axis rotation zero speed
target: M-axis rotation zeroing speed

[ctx: FlatEmbroidery]
en: M-axis rotational motion acceleration
target: M-axis rotation acceleration

[ctx: FlatEmbroidery]
en: Machine head board bus detection
target: Headboard bus detection

[ctx: FlatEmbroidery]
en: Manual movement speed of ring shaft
target: Loop-axis manual movement speed

[ctx: FlatEmbroidery]
en: MateEmb
target: FabricEmb

[ctx: FlatEmbroidery]
en: Maximum acceleration limit of EMB movable frame
target: Max. acceleration limit of EMB frame-moving

[ctx: FlatEmbroidery]
en: Maximum speed limit of EMB movable frame
target: Max. speed limit of EMB frame-moving

[ctx: FlatEmbroidery]
en: Maximum speed of EMB spindle
target: Max.speed of EMB spindle

[ctx: FlatEmbroidery]
en: Maximum speed of chenille spindle
target: Max. speed of chenille spindle

[ctx: FlatEmbroidery]
en: Maximum speed of flat Emb loose bead
target: Max. speed of bead emb

[ctx: FlatEmbroidery]
en: Maximum speed of simple towel
target: Max. speed of simple chenille emb

[ctx: FlatEmbroidery]
en: Maximum spindle speed of EMB stitch skipping
target: Max. spindle speed of stitch jumping

[ctx: FlatEmbroidery]
en: Mending embroidery is complete
target: Mending embroidery done

[ctx: FlatEmbroidery]
en: Minimum cutting speed
target: Min. cutting speed

[ctx: FlatEmbroidery]
en: Modify the first level password
target: Modify level 1 password

[ctx: FlatEmbroidery]
en: MoveBorder
target: Quantitative frame moving

[ctx: FlatEmbroidery]
en: Moving frame direction of EMB trimming
target: Frame direction when EMB thread-trim

[ctx: FlatEmbroidery]
en: Moving frame displacement of EMB trimming
target: Frame-moving displacement when EMB thread-trim

[ctx: FlatEmbroidery]
en: Needle index 1
target: Stitches index 1

[ctx: FlatEmbroidery]
en: Needle index 1 move distance
target: Stitches index 1 move distance

[ctx: FlatEmbroidery]
en: Needle index 10
target: Stitches index 10

[ctx: FlatEmbroidery]
en: Needle index 10 move distance
target: Stitches index 10 move distance

[ctx: FlatEmbroidery]
en: Needle index 2
target: Stitches index 2

[ctx: FlatEmbroidery]
en: Needle index 2 move distance
target: Stitches index 2 move distance

[ctx: FlatEmbroidery]
en: Needle index 3
target: Stitches index 3

[ctx: FlatEmbroidery]
en: Needle index 3 move distance
target: Stitches index 3 move distance

[ctx: FlatEmbroidery]
en: Needle index 4
target: Stitches index 4

[ctx: FlatEmbroidery]
en: Needle index 4 move distance
target: Stitches index 4 move distance

[ctx: FlatEmbroidery]
en: Needle index 5
target: Stitches index 5

[ctx: FlatEmbroidery]
en: Needle index 5 move distance
target: Stitches index 5 move distance

[ctx: FlatEmbroidery]
en: Needle index 6
target: Stitches index 6

[ctx: FlatEmbroidery]
en: Needle index 6 move distance
target: Stitches index 6 move distance

[ctx: FlatEmbroidery]
en: Needle index 7
target: Stitches index 7

[ctx: FlatEmbroidery]
en: Needle index 7 move distance
target: Stitches index 7 move distance

[ctx: FlatEmbroidery]
en: Needle index 8
target: Stitches index 8

[ctx: FlatEmbroidery]
en: Needle index 8 move distance
target: Stitches index 8 move distance

[ctx: FlatEmbroidery]
en: Needle index 9
target: Stitches index 9

[ctx: FlatEmbroidery]
en: Needle index 9 move distance
target: Stitches index 9 move distance

[ctx: FlatEmbroidery]
en: Needle skipping mode
target: Frame-changing mode of jump-stitch

[ctx: FlatEmbroidery]
en: Needle speed limit allows
target: Needle speed limit Enable

[ctx: FlatEmbroidery]
en: Needles at the end of the chenille
target: Chenille ending stitches

[ctx: FlatEmbroidery]
en: Needles for Coil baseline breakage detection
target: Coiling bobbin thread-break detected stitches

[ctx: FlatEmbroidery]
en: Needles for Coil topline breakage detection
target: Coiling upper thread-break detected stitches

[ctx: FlatEmbroidery]
en: Needles for detection of EMB bottom thread breakage
target: EMB bobbin thread-break detected stitches

[ctx: FlatEmbroidery]
en: Needles for detection of EMB thread breakage
target: EMB upper thread-break detected stitches

[ctx: FlatEmbroidery]
en: Needles for pleated EMB baseline breakage detection
target: Pleated emb. bobbin thread-break detect.stitches

[ctx: FlatEmbroidery]
en: Needles for pleated EMB topline breakage detection
target: Pleated emb. upper thread-break detect.stitches

[ctx: FlatEmbroidery]
en: Needles is not detected when the EMB bottom thread
target: No stitches detect. when EMB bobbin thread starts

[ctx: FlatEmbroidery]
en: Needles is not detected when the EMB thread
target: No stitches detect. when EMB upper thread starts

[ctx: FlatEmbroidery]
en: Needles skipped at the beginning of chenille breakage detection
target: Chenille thread-break detect start-jump stitches

[ctx: FlatEmbroidery]
en: Needles to end ahead of time
target: Mending Advance Ending Stitches

[ctx: FlatEmbroidery]
en: No return to zero:0;Return to zero:1
target: Not zeroing:0;Zeroing:1

[ctx: FlatEmbroidery]
en: No:0;Auto break:1
target: NoBreak:0;Auto break:1

[ctx: FlatEmbroidery]
en: No:0;Automatic thread:1;Final:2;Data:3
target: NoTrim:0;AutoTrim:1;FinalTrim:2;DataTrim:3

[ctx: FlatEmbroidery]
en: No:0;Automatic:1
target: NoTrim:0;AutoTrim:1

[ctx: FlatEmbroidery]
en: No:0;Bottom line:1;Up and down line:2
target: NoTrim:0;BobbinTrim:1;BobbinAndUpperTrim:2

[ctx: FlatEmbroidery]
en: No:0;Delay Reminder:1;Piece count:2;Immediately by length:3
target: No:0;Length Count DelayRemind:1;Piece count:2;Length Count ImmedRemind:3

[ctx: FlatEmbroidery]
en: No:0;Electromagnet:1;Stepper motor:2
target: NoLocking:0;Electromagnet:1;Stepper motor:2

[ctx: FlatEmbroidery]
en: No:0;Left:1;Forward:2;Right:3;Backward:4
target: NoMoving:0;Left:1;Forward:2;Right:3;Backward:4

[ctx: FlatEmbroidery]
en: No:0;Manual:1;Auto:2;All:3
target: NoMending:0;Manual:1;Auto:2;All:3

[ctx: FlatEmbroidery]
en: No:0;Work hours:1;Work needles:2;Keep going:3
target: NoDustRemoval:0;Work hours:1;Work stitches:2;Keep going:3

[ctx: FlatEmbroidery]
en: No:0;Work times:1;Work needles:2;Keep refueling:3
target: NoOiling:0;Work hours:1;Work stitches:2;Keep oiling:3

[ctx: FlatEmbroidery]
en: None:0;Other typesⅠ:1;FuyiⅠ:2;FuyiⅡ:3
target: No ABC:0;Others ABCⅠ:1;Richpeace ABCⅠ:2;Richpeace ABCⅡ:3

[ctx: FlatEmbroidery]
en: Nose number
target: Head number

[ctx: FlatEmbroidery]
en: Number of EMB heads
target: Nos of EMB heads

[ctx: FlatEmbroidery]
en: Number of chenille heads
target: Nos of chenille heads

[ctx: FlatEmbroidery]
en: Number of coil heads
target: Nos of coiling heads

[ctx: FlatEmbroidery]
en: Number of machine heads
target: Nos of machine heads Error

[ctx: FlatEmbroidery]
en: Number of needles per head for EMB
target: Nos of needles per EMB head

[ctx: FlatEmbroidery]
en: Number of needles per head for chenille
target: Nos of needles per chenille head

[ctx: FlatEmbroidery]
en: Number of shuttles
target: Nos of rotary hooks

[ctx: FlatEmbroidery]
en: Number of slow motion stitches for EMB stitch
target: EMB. start slow motion stitches

[ctx: FlatEmbroidery]
en: Number of slow-moving stitches for towel starting
target: Chenille start slow motion stitches

[ctx: FlatEmbroidery]
en: Number of stitches for chenille starting and locking
target: Chenille start locking stitches

[ctx: FlatEmbroidery]
en: Number of stitches for pleated embroidery lock
target: Pleated emb. locking stitches

[ctx: FlatEmbroidery]
en: Number of traverses
target: Nos of traverses

[ctx: FlatEmbroidery]
en: Offset method of pasting embroidery
target: Offset method of applique embroidery

[ctx: FlatEmbroidery]
en: Offset point X allowed
target: Offset point X Enable

[ctx: FlatEmbroidery]
en: Offset point Y allowed
target: Offset point Y Enable

[ctx: FlatEmbroidery]
en: Offset point coordinate valid flag
target: Valid offfset point coordinate

[ctx: FlatEmbroidery]
en: Oil
target: Manual Oiling

[ctx: FlatEmbroidery]
en: Oil mode selection
target: Oiling modes

[ctx: FlatEmbroidery]
en: One-wayClamp:0;LaserPosition:1;LaserBlow:2;TrackRope:3;LaserControl:4
target: One-wayClamp:0;LaserPosition:1;LaserBlow:2;TracingCord:3;LaserControl:4

[ctx: FlatEmbroidery]
en: Open
target: ON

[ctx: FlatEmbroidery]
en: Parking and ringing the shaft to zero
target: Parking Loop-shaft zeroing

[ctx: FlatEmbroidery]
en: Parking location selection after completion
target: Parking location after completion

[ctx: FlatEmbroidery]
en: Patch embroidery stop
target: Applique embroidery stop

[ctx: FlatEmbroidery]
en: PatchEmb
target: AppliqueEmb

[ctx: FlatEmbroidery]
en: Pleated distance
target: Pleating distance

[ctx: FlatEmbroidery]
en: Presser foot lowering start angle
target: Presser foot down start angle

[ctx: FlatEmbroidery]
en: Presser foot return speed
target: Presser foot zeroing speed

[ctx: FlatEmbroidery]
en: Pressure foot amplitude
target: Presser foot amplitude

[ctx: FlatEmbroidery]
en: Production preset
target: Output preset

[ctx: FlatEmbroidery]
en: Prohibit:0;Allow:1
target: Disable:0;Enable:1

[ctx: FlatEmbroidery]
en: Read the head board parameter error
target: Headboard parameter read error

[ctx: FlatEmbroidery]
en: Refueling gas storage
target: Oiling and Air storage time

[ctx: FlatEmbroidery]
en: Refueling needle interval
target: Oiling Stitches interval

[ctx: FlatEmbroidery]
en: Refueling times interval
target: Oiling time interval

[ctx: FlatEmbroidery]
en: Relax angle
target: Thread-Hook Relax angle

[ctx: FlatEmbroidery]
en: Repeated
target: Repeated emb

[ctx: FlatEmbroidery]
en: Reset CSV file
target: Reset Install and Debug Progress

[ctx: FlatEmbroidery]
en: Right loose bead lifting
target: Right bead lifting

[ctx: FlatEmbroidery]
en: Ring axis coordinate system error
target: Looping shaft coordinate system error

[ctx: FlatEmbroidery]
en: Ring shaft speed
target: Looping shaft running speed

[ctx: FlatEmbroidery]
en: Ring shaft start and stop speed
target: Looping shaft start-stop speed

[ctx: FlatEmbroidery]
en: Ring shaft zero speed
target: Looping shaft zeroing speed

[ctx: FlatEmbroidery]
en: RodPosition
target: Needle bar Position

[ctx: FlatEmbroidery]
en: Root
target: Super User

[ctx: FlatEmbroidery]
en: Rotation angle
target: Rotate Angle

[ctx: FlatEmbroidery]
en: Sawtooth Swing Duration Angle
target: Zigzag Swing Duration Angle

[ctx: FlatEmbroidery]
en: Sawtooth running speed
target: Zigzag running speed

[ctx: FlatEmbroidery]
en: Sawtooth start position
target: Zigzag start position

[ctx: FlatEmbroidery]
en: Sawtooth start speed
target: Zigzag start speed

[ctx: FlatEmbroidery]
en: Sawtooth swing
target: Zigzag swing

[ctx: FlatEmbroidery]
en: Sawtooth swing start angle
target: Zigzag swing start angle

[ctx: FlatEmbroidery]
en: Sawtooth upper position
target: Zigzag upper position

[ctx: FlatEmbroidery]
en: Sawtooth zeroing speed
target: Zigzag zeroing speed

[ctx: FlatEmbroidery]
en: Scissor motor start and stop acceleration
target: Scissor motor start-stop acceleration

[ctx: FlatEmbroidery]
en: Sequential dial completion angle
target: Sequin out completion angle

[ctx: FlatEmbroidery]
en: Sequester slice opening angle
target: Sequin cut opening angle

[ctx: FlatEmbroidery]
en: Sequester sliced knife completion angle
target: Sequin cut close completion angle

[ctx: FlatEmbroidery]
en: SetStart
target: Setembstartpoint

[ctx: FlatEmbroidery]
en: Shear mode selection
target: Thread-trim mode selection

[ctx: FlatEmbroidery]
en: ShutCount
target: HookCountRst

[ctx: FlatEmbroidery]
en: Shuttle change exception
target: Bobbin change abnormal

[ctx: FlatEmbroidery]
en: ShuttlePara
target: AutomaticBobbinChange(ABC)

[ctx: FlatEmbroidery]
en: Signal
target: Sensor Signal

[ctx: FlatEmbroidery]
en: Simple chenile lifting delay
target: Simple chenile lift delay

[ctx: FlatEmbroidery]
en: Simple towel action completion angle
target: Simple chenille action completion angle

[ctx: FlatEmbroidery]
en: Simple towel lifting
target: Simple chenille lifting

[ctx: FlatEmbroidery]
en: Simple towel swing
target: Simple chenille swing

[ctx: FlatEmbroidery]
en: Skipped stitches for Coil baseline breakage detection
target: Coiling EMB bobbin thread-break detect. skipped stitches

[ctx: FlatEmbroidery]
en: Skipped stitches for Coil topline breakage detection
target: Coiling EMB upper thread-break detect. skipped stitches

[ctx: FlatEmbroidery]
en: Slack Wire Control
target: Thread Clamp-loosen Control

[ctx: FlatEmbroidery]
en: Software
target: Software setting

[ctx: FlatEmbroidery]
en: Spindle manual movement speed
target: Spindle manual moving speed

[ctx: FlatEmbroidery]
en: Spindle return to zero speed
target: Spindle zeroing speed

[ctx: FlatEmbroidery]
en: Spindle speed of EMB
target: EMB working speed

[ctx: FlatEmbroidery]
en: Spindle speed of embroidery
target: EMB spindle speed

[ctx: FlatEmbroidery]
en: Spindle start and stop speed
target: Spindle start-stop speed

[ctx: FlatEmbroidery]
en: Start slow speed of EMB spindle
target: EMB starting spindle slow-moving speed

[ctx: FlatEmbroidery]
en: Start-stop acceleration of elastic wire motor
target: Clamp-loosen motor start-stop acceleration

[ctx: FlatEmbroidery]
en: Starting angle of presser foot descent
target: Starting angle of presser foot down

[ctx: FlatEmbroidery]
en: Starting angle of presser foot rise
target: Starting angle of presser foot lift

[ctx: FlatEmbroidery]
en: Static:0;Dynamic:1
target: StaticTrim:0;DynamicTrim:1

[ctx: FlatEmbroidery]
en: Step size of skipped stitches to be inserted
target: Stitch size of skipped stitches to be inserted

[ctx: FlatEmbroidery]
en: StitchesNum:0;Distance:1
target: Stitches:0;Distance:1

[ctx: FlatEmbroidery]
en: Supplementary embroidery
target: Mending embroidery

[ctx: FlatEmbroidery]
en: The Chenille ring shaft is not at the zero position
target: Chenille Looping shaft is not at the zero position

[ctx: FlatEmbroidery]
en: The Chenille spindle is not at zero
target: Chenille spindle is not at zero

[ctx: FlatEmbroidery]
en: The M axis of the Chenille is not at the zero position
target: Chenille M axis is not at the zero position

[ctx: FlatEmbroidery]
en: The beads rises is allowed when cut
target: Bead device lift when thread-trim Enable

[ctx: FlatEmbroidery]
en: The beads rises is allowed when line break parking
target: Bead device lift when thread-break park. Enable

[ctx: FlatEmbroidery]
en: The beads rises is allowed when pull rod parking
target: Bead device lift when pull-bar park. Enable

[ctx: FlatEmbroidery]
en: The embroidery spindle is not in the zero position
target: Embroidery spindle is not in the zero position

[ctx: FlatEmbroidery]
en: The error range of the elastic wire motor
target: Error range of thread-tighten/loosen motor

[ctx: FlatEmbroidery]
en: The gear ratio of plain emb spindle is normal
target: Flat emb. spingle gear ratio is normal

[ctx: FlatEmbroidery]
en: The maximum spindle speed of Coil skip stitch
target: Coiling stitch-jump max. spindle speed

[ctx: FlatEmbroidery]
en: The position of the elastic wire motor is wrong
target: Clamp-loosen motor position is wrong

[ctx: FlatEmbroidery]
en: The sequin rises is allowed when line break parking
target: Sequin device lift when thread-break park Enable

[ctx: FlatEmbroidery]
en: The sequin rises is allowed when pull rod parking
target: Sequin device lift when pull-bar parking Enable

[ctx: FlatEmbroidery]
en: Thread trimmer
target: Thread-trim position

[ctx: FlatEmbroidery]
en: Towel spindle gear ratio error
target: Chenille spindle gear ratio error

[ctx: FlatEmbroidery]
en: Towel spindle gear ratio is normal
target: Chenille spindle gear ratio is normal

[ctx: FlatEmbroidery]
en: TowelH
target: ChenilleH

[ctx: FlatEmbroidery]
en: Tracking rope EMB needle position
target: TracingCording needle position

[ctx: FlatEmbroidery]
en: Tracking rope EMB speed
target: TracingCording speed

[ctx: FlatEmbroidery]
en: Tracking rope embroidery alarm
target: TracingCording alarm

[ctx: FlatEmbroidery]
en: TraverseAlone:1;TraverseAll:2
target: SingleTraverse:1;AllTraverse:2

[ctx: FlatEmbroidery]
en: Trim
target: ThreadTrim

[ctx: FlatEmbroidery]
en: Turn on the Chenille and ring the shaft to zero
target: Chenille looping shaft to zero when starting

[ctx: FlatEmbroidery]
en: Turn on the independent presser foot to zero
target: Independent presser foot to zero when starting

[ctx: FlatEmbroidery]
en: Turn on the winding motor to zero
target: Coiling tracing motor zeroing in starting

[ctx: FlatEmbroidery]
en: Two way electromagnet hold time
target: Two-way electromagnet hold time

[ctx: FlatEmbroidery]
en: Type of sequin unit
target: Sequin device type

[ctx: FlatEmbroidery]
en: UnderDetect
target: BobbinDetect

[ctx: FlatEmbroidery]
en: Universal lead:0;Richpeace Lead:1
target: II-tensionbase:0;III-tensionbase:1

[ctx: FlatEmbroidery]
en: UsualRepeat:0;XSymmetry:1;YSymmetry:2;XYSymmetry:3
target: UsualRepeat:0;XSymmetry:1;YSymmetry:2;XYSymmetry:3;UsualByColor:4;XColor:5;YColor:6;XYColor:7

[ctx: FlatEmbroidery]
en: Waiting time for shuttle change
target: Waiting time for bobbin change

[ctx: FlatEmbroidery]
en: Whether the starting point of repeated emb is suspended
target: Whether to pause the start-point of repeat EMB

[ctx: FlatEmbroidery]
en: Wind lock type
target: Coiling Headlock type

[ctx: FlatEmbroidery]
en: Winding disconnection detection prohibition
target: Coiling disconnection detection prohibition

[ctx: FlatEmbroidery]
en: Winding spindle is not at zero position
target: Coiling spindle is not at zero position

[ctx: FlatEmbroidery]
en: Winding spindle zero compensation
target: Coiling spindle zero compensation

[ctx: FlatEmbroidery]
en: Wrong position of towel lift motor
target: Wrong position of chenille lift motor

[ctx: FlatEmbroidery]
en: X direction magnification
target: X- magnification

[ctx: FlatEmbroidery]
en: X repetition space
target: X repetition interval

[ctx: FlatEmbroidery]
en: X repetition times
target: Nos of repetitions (X)

[ctx: FlatEmbroidery]
en: X to move motor
target: X moving motor

[ctx: FlatEmbroidery]
en: XY dry running speed
target: XY no-load running speed

[ctx: FlatEmbroidery]
en: Y direction magnification
target: Y-magnification

[ctx: FlatEmbroidery]
en: Y repetition space
target: Y repetition interval

[ctx: FlatEmbroidery]
en: Y repetition times
target: Nos of repetitions (Y)

[ctx: FlatEmbroidery]
en: Y to move motor
target: Y moving motor

[ctx: FlatEmbroidery]
en: Zero
target: Zeroing

[ctx: FlatEmbroidery]
en: eight needle position
target: 8th needle position

[ctx: FlatEmbroidery]
en: eleven needle position
target: 11th needle position

[ctx: FlatEmbroidery]
en: five needle position
target: 5th needle position

[ctx: FlatEmbroidery]
en: four needle position
target: 4th needle position

[ctx: FlatEmbroidery]
en: limit XY movement
target: XY movement limit

[ctx: FlatEmbroidery]
en: lock type
target: Headlock type

[ctx: FlatEmbroidery]
en: nine needle position
target: 9th needle position

[ctx: FlatEmbroidery]
en: one needle position
target: 1st needle position

[ctx: FlatEmbroidery]
en: open box button 1
target: Frame-open button 1

[ctx: FlatEmbroidery]
en: open box button 2
target: Frame-open button 2

[ctx: FlatEmbroidery]
en: open box button 3
target: Frame-open button 3

[ctx: FlatEmbroidery]
en: open box button 4
target: Frame-open button 4

[ctx: FlatEmbroidery]
en: open box button 5
target: Frame-open button 5

[ctx: FlatEmbroidery]
en: open box button 6
target: Frame-open button 6

[ctx: FlatEmbroidery]
en: sawtooth acceleration
target: Zigzag acceleration

[ctx: FlatEmbroidery]
en: seven needle position
target: 7th needle position

[ctx: FlatEmbroidery]
en: six needle position
target: 6th needle position

[ctx: FlatEmbroidery]
en: ten needle position
target: 10th needle position

[ctx: FlatEmbroidery]
en: three needle position
target: 3th needle position

[ctx: FlatEmbroidery]
en: towel scissors change
target: Chenille scissors zero

[ctx: FlatEmbroidery]
en: towel scissors relax
target: Chenille scissors release

[ctx: FlatEmbroidery]
en: twelve needle position
target: 12th needle position

[ctx: FlatEmbroidery]
en: twisted thread
target: Coiling thread-buckle

[ctx: FlatEmbroidery]
en: two needle position
target: 2rd needle position

[ctx: FlatEmbroidery]
en: winding lock
target: Coiling headlock

[ctx: FlatEmbroidery]
en: winding oil
target: Coiling oiling

[ctx: FlatEmbroidery]
en: winding scissors
target: Coiling scissors

[ctx: FlatEmbroidery]
en: xy manual movement speed 1
target: xy manual moving speed 1

[ctx: FlatEmbroidery]
en: xy manual movement speed 2
target: xy manual moving speed 2

[ctx: FlatEmbroidery]
en: xy manual movement speed 3
target: xy manual moving speed 3

[ctx: GLOBAL]
en: AllToZero:
target: All Zeroing:

[ctx: GLOBAL]
en: BackEmbPoint:
target: Back start-Point:

[ctx: GLOBAL]
en: BackFeedingPoint:
target: Back Feed Point:

[ctx: GLOBAL]
en: BackOffsetPoint:
target: Back offset Point:

[ctx: GLOBAL]
en: BackOrigin:
target: Back Origin:

[ctx: GLOBAL]
en: BackWorkPoint:
target: Back Work Point:

[ctx: GLOBAL]
en: BorderCheck:
target: Border Check:

[ctx: GLOBAL]
en: BownCut:
target: Bobbin-thread-trim:

[ctx: GLOBAL]
en: Embroidery:
target: Flat Emb.:

[ctx: GLOBAL]
en: Factory expects delivery time
target: Factory est. delivery time

[ctx: GLOBAL]
en: FlatEmbHook:
target: EMBthreadhooking:

[ctx: GLOBAL]
en: ForwardOrBackward:
target: FW or BW:

[ctx: GLOBAL]
en: Frequently used button1
target: Shortcut button1

[ctx: GLOBAL]
en: Frequently used button10
target: Shortcut button10

[ctx: GLOBAL]
en: Frequently used button2
target: Shortcut button2

[ctx: GLOBAL]
en: Frequently used button3
target: Shortcut button3

[ctx: GLOBAL]
en: Frequently used button4
target: Shortcut button4

[ctx: GLOBAL]
en: Frequently used button5
target: Shortcut button5

[ctx: GLOBAL]
en: Frequently used button6
target: Shortcut button6

[ctx: GLOBAL]
en: Frequently used button7
target: Shortcut button7

[ctx: GLOBAL]
en: Frequently used button8
target: Shortcut button8

[ctx: GLOBAL]
en: Frequently used button9
target: Shortcut button9

[ctx: GLOBAL]
en: Input rack number
target: Input MFG. No

[ctx: GLOBAL]
en: Is there a Three combination embroidery
target: Is there three-head combinated emb

[ctx: GLOBAL]
en: Is there a double combination embroidery
target: Is there double-head combinated emb

[ctx: GLOBAL]
en: Is there a head embroidery
target: Is there alternate-head emb

[ctx: GLOBAL]
en: Is there an independent presser foo
target: Is there an independent presser foot

[ctx: GLOBAL]
en: ManualOil:
target: ManualOiling:

[ctx: GLOBAL]
en: NeedleRodPosition:
target: NeedlebarPosition:

[ctx: GLOBAL]
en: QuantityMoveFrame:
target: Quantitativeframemove:

[ctx: GLOBAL]
en: QuiDouble:
target: D-Row:

[ctx: GLOBAL]
en: QuiEmbroiderye:
target: QE machine:

[ctx: GLOBAL]
en: QuiSingle:
target: S-Row:

[ctx: GLOBAL]
en: SetEmbPoint:
target: Setembstartpoint:

[ctx: GLOBAL]
en: SetFeedingPoint:
target: SetFeedPoint:

[ctx: GLOBAL]
en: Whether there is a Automatic shuttle change function
target: Whether there is ABC function

[ctx: GLOBAL]
en: Whether there is a bead function
target: Whether there is beads emb. function

[ctx: GLOBAL]
en: Whether there is a chenille function
target: Whether there is chenille emb. function

[ctx: GLOBAL]
en: Whether there is a coli function
target: Whether there is coiling emb. function

[ctx: GLOBAL]
en: Whether there is a laser function
target: Whether there is laser-cut function

[ctx: GLOBAL]
en: Whether there is a sequin function
target: Whether there is sequin function

[ctx: GLOBAL]
en: Whether there is a simpleTowel function
target: Whether there is simple chenille function

[ctx: MainWidget]
en: Accessibility
target: Auxiliary Function

[ctx: MainWidget]
en: Accessibility > Chenille Debug
target: Auxiliary Function > Chenille Debug

[ctx: MainWidget]
en: Accessibility > Common functions setting
target: Auxiliary Function > Common functions setting

[ctx: MainWidget]
en: Accessibility > EXB Upgrade
target: Auxiliary Function > EXB Upgrade

[ctx: MainWidget]
en: Accessibility > Needle setting
target: Auxiliary Function > Needle-bar setting

[ctx: MainWidget]
en: Accessibility > Network Manage
target: Auxiliary Function > Network Manage

[ctx: MainWidget]
en: Accessibility > Root
target: Auxiliary Function > Super Users

[ctx: MainWidget]
en: Accessibility > Sequin Parameters
target: Auxiliary Function > Sequin Parameters

[ctx: MainWidget]
en: Accessibility > Software setting
target: Auxiliary Function> Software setting

[ctx: MainWidget]
en: Accessibility > Spindle test
target: Auxiliary Function > Spindle test

[ctx: MainWidget]
en: Accessibility > Time setting
target: Auxiliary Function > Time setting

[ctx: MainWidget]
en: Assist
target: Auxiliary Function

[ctx: MainWidget]
en: Coil embroidery setting workable area
target: Coiling set workable area

[ctx: MainWidget]
en: Coil parameters
target: Coiling parameters

[ctx: MainWidget]
en: Cut parameters
target: Trim parameters

[ctx: MainWidget]
en: Do you want to embroider borders?The machine will move after pulling the rod, please pay attention to safety!
target: Whether to doing border embroidery?The machine will move after pulling the rod, please pay attention to safety!

[ctx: MainWidget]
en: Do you want to outLine embroidery?The machine will move after pulling the rod, please pay attention to safety!
target: Whether to do outLine embroidery?The machine will move after pulling the rod, please pay attention to safety!

[ctx: MainWidget]
en: Exit mate emb
target: Exit emb

[ctx: MainWidget]
en: Flat embroidery setting workable area
target: EMB setting workable area

[ctx: MainWidget]
en: Forward or back
target: Forward or backward

[ctx: MainWidget]
en: Main
target: Main Interface

[ctx: MainWidget]
en: Mate emb mode
target: Fabric emb mode

[ctx: MainWidget]
en: Needle setting
target: Needle bar setting

[ctx: MainWidget]
en: Open Line Emb
target: PositionLine Emb

[ctx: MainWidget]
en: Open line embroidery
target: PositionLine Emb

[ctx: MainWidget]
en: Patch embroider setting
target: Applique EMB. setting

[ctx: MainWidget]
en: Patch embroider setting < Embroidery function
target: Applique EMB setting < Applique Emb

[ctx: MainWidget]
en: Pattern setting > Towel high set
target: Pattern setting > Chenille Height set

[ctx: MainWidget]
en: Production statistics:
target: Output statistics:

[ctx: MainWidget]
en: QuiEmbroidery Control System
target: QE Control System

[ctx: MainWidget]
en: Repeated emb
target: Repeated emb Para

[ctx: MainWidget]
en: Richpeace QuiEmbroidery Control System
target: Richpeace QE Control System

[ctx: MainWidget]
en: Root
target: Super User

[ctx: MainWidget]
en: Root > Frame angle setting
target: Super User > Frame angle setting

[ctx: MainWidget]
en: Shuttle parameters
target: ABC parameters

[ctx: MainWidget]
en: The number of repetitions in the X direction of the selected pattern is unreasonable, please reset it!
target: Nos of repetitions (X) setting of selected pattern is unreasonable, please reset!

[ctx: MainWidget]
en: Towel high set
target: Chenille height set

[ctx: MainWidget]
en: Work Nose Head:
target: Current Head:

[ctx: MainWidget]
en: Work Nose Head:Chenille head
target: Current Head:Chenille head

[ctx: MainWidget]
en: Work Nose Head:Coil head
target: Current Head:Coil head

[ctx: MainWidget]
en: Work Nose Head:Emb shead
target: Current Head:Emb shead

[ctx: MainWidget]
en: Work Nose Head:Unknown
target: Current Head:Unknown

[ctx: MainWidget]
en: assist
target: Auxiliary Function

[ctx: MainWidgetFunction]
en:  break line num:
target:  Thread-break times:

[ctx: MainWidgetFunction]
en: All to reset
target: All reset

[ctx: MainWidgetFunction]
en: All to zero
target: All zeroing

[ctx: MainWidgetFunction]
en: Back embroidery poin
target: Back start-point

[ctx: MainWidgetFunction]
en: Bottom line detection
target: Bobbin detection

[ctx: MainWidgetFunction]
en: Breakage Log
target: Thread-break Log

[ctx: MainWidgetFunction]
en: ChenBrokenLine Head:
target: Chenille Head:

[ctx: MainWidgetFunction]
en: Chenille BrokenLine
target: Chenille Thread-Broken

[ctx: MainWidgetFunction]
en: Chenille trim
target: Chenille trimming

[ctx: MainWidgetFunction]
en: Coil BrokenLine
target: Coiling thread-break

[ctx: MainWidgetFunction]
en: Coil M Spindle rotate angle
target: Coiling M Spindle rotate angle

[ctx: MainWidgetFunction]
en: Coil Spindle jog
target: Coiling Spindle jog

[ctx: MainWidgetFunction]
en: Coil Spindle rotate angle
target: Coiling Spindle rotate angle

[ctx: MainWidgetFunction]
en: Coil Trim
target: Coiling Trimming

[ctx: MainWidgetFunction]
en: CoilBrokenLine Head:
target: Coiling Head:

[ctx: MainWidgetFunction]
en: Color change
target: Color-change position

[ctx: MainWidgetFunction]
en: Delete complete!
target: Delete done!

[ctx: MainWidgetFunction]
en: Delete complete,please reselect the file!
target: Delete done,please reselect the file!

[ctx: MainWidgetFunction]
en: Do you delete the configuration file?
target: Whether to delete the configuration file?

[ctx: MainWidgetFunction]
en: Do you delete the csv file?
target: Whether to delete the csv file?

[ctx: MainWidgetFunction]
en: Do you perform head board bus detection?
target: Whether to perform head board bus detection?

[ctx: MainWidgetFunction]
en: EmbBrokenLine Head  :
target: Emb thread-break Head  :

[ctx: MainWidgetFunction]
en: EmbBrokenLine Head:
target: Emb Head:

[ctx: MainWidgetFunction]
en: EmbHead BrokenLine
target: EmbHead thread-break

[ctx: MainWidgetFunction]
en: Emboriey trim
target: Emb Trim

[ctx: MainWidgetFunction]
en: Face line detection
target: Upper thread detection

[ctx: MainWidgetFunction]
en: Flat embroidery cutter is not returning
target: EMB cutter not returns

[ctx: MainWidgetFunction]
en: Flat embroidery hook
target: EMB thread-hooking

[ctx: MainWidgetFunction]
en: Flat embroidery setting workable area
target: EMB setting workable area

[ctx: MainWidgetFunction]
en: Head Parameter Import
target: HB Parameter Import

[ctx: MainWidgetFunction]
en: Head embroidery
target: Alternate head emb

[ctx: MainWidgetFunction]
en: Hook test
target: EMB hook knife

[ctx: MainWidgetFunction]
en: Hook the knife is about to move, please pay attention to safety!
target: Hook knife is going to move, please pay attention to safety!

[ctx: MainWidgetFunction]
en: If all process to reset?
target: Whether to reset all process?

[ctx: MainWidgetFunction]
en: If automatically set work range?
target: Whether to auto-set working range?

[ctx: MainWidgetFunction]
en: If reset the pattern Fcg data?
target: Whether to reset the pattern Fcg data?

[ctx: MainWidgetFunction]
en: Is the bottom line count reset?
target: Whether to reset bobbin thread counting?

[ctx: MainWidgetFunction]
en: Is the pattern Fcg clear?
target: Whether to clear pattern Fcg?

[ctx: MainWidgetFunction]
en: Is the pattern clear?
target: Whether to clear patterns?

[ctx: MainWidgetFunction]
en: Is the version restored?
target: Whether to restore version?

[ctx: MainWidgetFunction]
en: Lower cutter
target: Bobbin-thread trim

[ctx: MainWidgetFunction]
en: Manual oil
target: Manual oiling

[ctx: MainWidgetFunction]
en: Modify the first level password
target: Modify level 1 password

[ctx: MainWidgetFunction]
en: Moving frame parameter export
target: Frame moving parameter export

[ctx: MainWidgetFunction]
en: Moving frame parameter import
target: Frame moving parameter import

[ctx: MainWidgetFunction]
en: Needle rod position
target: Needle bar position

[ctx: MainWidgetFunction]
en: Pattern break line num:
target: Pattern thread-break num:

[ctx: MainWidgetFunction]
en: Perparalboard system upgrade failed!
target: EXB system upgrade failed!

[ctx: MainWidgetFunction]
en: Primary password successfully logged in!
target: Level 1 password successfully logged in!

[ctx: MainWidgetFunction]
en: Quantity move frame
target: Quantitative frame moving

[ctx: MainWidgetFunction]
en: Reset Repeat Num
target: Reset Repeations

[ctx: MainWidgetFunction]
en: Reset Repeat Num!
target: Reset Repeations!

[ctx: MainWidgetFunction]
en: Right sequin change color
target: R-sequin color change

[ctx: MainWidgetFunction]
en: Root > Frame Parameter Import
target: Super User > Frame Parameter Import

[ctx: MainWidgetFunction]
en: Root > Head Parameter Import
target: Super User > Headboard ParaImport

[ctx: MainWidgetFunction]
en: Root successfully logged in!
target: Super User successfully logged in!

[ctx: MainWidgetFunction]
en: Settings require screen restart to take effect!
target: Restart settings to take effect HMI!

[ctx: MainWidgetFunction]
en: Shuttle count reset
target: Hook count reset

[ctx: MainWidgetFunction]
en: Slack Wire Control
target: Thread Clamp-loosen Control

[ctx: MainWidgetFunction]
en: The data file is send successfully!
target: The data file is sent successfully!

[ctx: MainWidgetFunction]
en: The external board system is upgraded!
target: The EXB system is upgraded!

[ctx: MainWidgetFunction]
en: The external board system upgrade...
target: The EXB system upgrading...

[ctx: MainWidgetFunction]
en: The interface program is licensed, and then take effect after restarting, please restart manually!
target: HMI program is licensed, and take effect after restarting, please restart manually!

[ctx: MainWidgetFunction]
en: The machine is about to change the shuttle automatically!
target: Machine is going to change bobbins automatically!

[ctx: MainWidgetFunction]
en: The machine is about to cut the thread, please pay attention to safety!
target: Machine is going to cut thread, please pay attention to safety!

[ctx: MainWidgetFunction]
en: The machine is about to move, please pay attention to safety!
target: Machine is going to move, please pay attention to safety!

[ctx: MainWidgetFunction]
en: The machine is about to oil!
target: Machine is going to lubricate!

[ctx: MainWidgetFunction]
en: The machine is about to reset, please pay attention to safety!
target: Machine is going to reset, please pay attention to safety!

[ctx: MainWidgetFunction]
en: The main control system has been successed, waiting until machine restart
target: The main control system has been successed, waiting until machine restarts

[ctx: MainWidgetFunction]
en: The needle pole is about to drop, please pay attention to safety!
target: Needle bars are going to drop, please pay attention to safety!

[ctx: MainWidgetFunction]
en: The password is wrong,please re-enter!
target: Wrong password, please re-enter!

[ctx: MainWidgetFunction]
en: The program is corrupted, please re-upgrade after replacing the program!
target: The program is corrupted, please re-upgrade after replacing it!

[ctx: MainWidgetFunction]
en: The remaining available time of the machine is
target: Machine remaining working time is

[ctx: MainWidgetFunction]
en: The settings take effect after restarting the interface!
target: Settings will take effect after HMI restarts!

[ctx: MainWidgetFunction]
en: Total number of embroidery:
target: Total emb. stitches:

[ctx: MainWidgetFunction]
en: Total number of patterns processed:
target: Total patterns processed:

[ctx: MainWidgetFunction]
en: Towel color change
target: Chenille color change

[ctx: MainWidgetFunction]
en: Trace offset
target: Stitch offset

[ctx: MainWidgetFunction]
en: Trim
target: ThreadTrim

[ctx: MainWidgetFunction]
en: USB flash drive is not detected!
target: USB is not detected!

[ctx: MainWidgetFunction]
en: Warrant
target: Authorize

[ctx: MainWidgetFunction]
en: Whether to export moving frame parameters?
target: Whether to export frame-moving parameters?

[ctx: MainWidgetFunction]
en: Whether to import movable frame parameters?
target: Whether to import frame-moving parameters?

[ctx: MainWidgetFunction]
en: Whether to set to change a shuttle automatically?
target: Whether to set to change a bobbin automatically?

[ctx: MainWidgetFunction]
en: Whether to test the gear ratio of the flat chenille spindle?
target: Whether to test the chenille spindle gear ratio?

[ctx: MainWidgetFunction]
en: Whether to test the gear ratio of the flat embroidery spindle?
target: Whether to test the flat emb. spindle gear ratio?

[ctx: MainWidgetFunction]
en: WkParameter Import
target: WorkPara Import

[ctx: MainWidgetFunction]
en: break line num:
target: Thread-breakages:

[ctx: MainWidgetFunction]
en: reset parameters password successfully logged in!
target: Reset parameters password successfully logged in!

[ctx: NeedleBarSetWidget]
en: BeadNum:
target: Bead qty:

[ctx: NeedleBarSetWidget]
en: Chenille Num:
target: Chenille Needle bar qty:

[ctx: NeedleBarSetWidget]
en: EmbNeedleNum:
target: Emb Needle bar qty.:

[ctx: NumerInputDialog]
en:  Number input
target:  Digit input

[ctx: ParameterSetDialog]
en: Accessibility > Root
target: Auxiliary Function > Super Users

[ctx: ParameterSetDialog]
en: Board IP settings
target: MB IP settings

[ctx: ParameterSetDialog]
en: Board port settings
target: MB port settings

[ctx: ParameterSetDialog]
en: Coil Head board parameters
target: Coiling Head board parameters

[ctx: ParameterSetDialog]
en: Color board parameters
target: Super User > Color board parameters

[ctx: ParameterSetDialog]
en: EnableNumber of flat embroidery heads
target: Flat Emb. Head Qty

[ctx: ParameterSetDialog]
en: IOT Configuration
target: IoT Configuration

[ctx: ParameterSetDialog]
en: IOT Configuration > Network Settings
target: IoT Configuration > Network Settings

[ctx: ParameterSetDialog]
en: Local Port  settings
target: Local Port settings

[ctx: ParameterSetDialog]
en: Network settings are completed, re-establish after reboot
target: Network settings done, re-connect after reboot

[ctx: ParameterSetDialog]
en: Number of chenille heads
target: Nos of chenille heads

[ctx: ParameterSetDialog]
en: Number of coil heads
target: Nos of coiling heads

[ctx: ParameterSetDialog]
en: Repetitions :
target: Repetitions:

[ctx: ParameterSetDialog]
en: Repetitions : 0
target: Repetitions: 0

[ctx: ParameterSetDialog]
en: Root
target: Super User

[ctx: ParameterSetDialog]
en: Root > Chenille Color board parameters
target: Super User > Chenille Color board parameters

[ctx: ParameterSetDialog]
en: Root > Chenille Head board parameters
target: Super User > Chenille Head board parameters

[ctx: ParameterSetDialog]
en: Root > Coil Head board parameters
target: Super User > Coil Head board parameters

[ctx: ParameterSetDialog]
en: Root > Color board parameters
target: Super User > Color board parameters

[ctx: ParameterSetDialog]
en: Root > EMB Head board parameters
target: Super User > EMB Headboard parameters

[ctx: ParameterSetDialog]
en: Root > Embroidery lock test
target: Super User > Embroidery headlock test

[ctx: ParameterSetDialog]
en: Root > HMI Configuration
target: Super User > HMI Configuration

[ctx: ParameterSetDialog]
en: Root > IOT Configuration
target: Super User > IoT Configuration

[ctx: ParameterSetDialog]
en: Root > Machine parameters
target: Super User > Machine parameters

[ctx: ParameterSetDialog]
en: Root > Pattern parameters
target: Super User > Pattern parameters

[ctx: ParameterSetDialog]
en: Root > Traverse settings
target: Super User > Traverse settings

[ctx: ParameterSetDialog]
en: Root > Work parameters
target: Super User > Work parameters

[ctx: ParameterSetDialog]
en: The settings take effect after restarting the interface!
target: Settings will take effect after HMI restarts!

[ctx: ParameterSetDialog]
en: Whether to exit embroidery lock test?
target: Whether to exit EMB headlock test?

[ctx: ParameterSetDialog]
en: Whether to recover the default parameters for the Chenille color board?
target: Whether to recover the Chenille color board default parameters?

[ctx: ParameterSetDialog]
en: Whether to recover the default parameters for the Chenille head board?
target: Whether to recover the  Chenille head board default parameters?

[ctx: ParameterSetDialog]
en: Whether to recover the default parameters for the Coil head board?
target: Whether to recover the Coiling head board default parameters?

[ctx: ParameterSetDialog]
en: Whether to recover the default parameters for the Emb color board?
target: Whether to recover the Emb color board default parameters?

[ctx: ParameterSetDialog]
en: Whether to recover the default parameters for the Emb head board?
target: Whether to recover the Emb head board default parameters?

[ctx: ParameterSetDialog]
en: Whether to recover the default parameters for the board?
target: Whether to recover the mainboard default parameters?

[ctx: ParameterSetDialog]
en: Whether to reset the number of repeated embroideries?
target: Whether to reset embroidery repetitions?

[ctx: ParameterSetDialog]
en: Whether to start embroidery lock test?
target: Whether to start EMB headlock test?

[ctx: ParameterSetDialog]
en: read parameter...
target: Parameter reading...

[ctx: PatternManageWidget]
en: Export complete
target: Export done

[ctx: PatternManageWidget]
en: Import complete
target: Import done

[ctx: PatternManageWidget]
en: USB flash drive is not detected!
target: USB is not detected!

[ctx: PatternSelectWidget]
en: BasisColorX
target: ByColorX

[ctx: PatternSelectWidget]
en: BasisColorXY
target: ByColorXY

[ctx: PatternSelectWidget]
en: BasisColorY
target: ByColorY

[ctx: PatternSelectWidget]
en: ColorNum
target: Colors qty

[ctx: PatternSelectWidget]
en: Height
target: High

[ctx: PatternSelectWidget]
en: NeedleNum
target: NeedleQTY

[ctx: PatternSelectWidget]
en: The number of stitches of the selected pattern has reached the upper limit (2 million stitches), and it cannot be embroidered!
target: The selected patterns stitches has reached the limit (2 million stitches), and it cannot be embroidered!

[ctx: PromptDialog]
en: Chain
target: Chain-stitch position

[ctx: PromptDialog]
en: Cheniile
target: Chenille

[ctx: PromptDialog]
en: Chenille
target: Chenille bit

[ctx: PromptDialog]
en: Clear the trace offset data of the current index
target: Clear stitch offset data of current index

[ctx: PromptDialog]
en: Coil
target: Coiling

[ctx: PromptDialog]
en: Coil head
target: Coiling head

[ctx: PromptDialog]
en: Color
target: Color Sequence

[ctx: PromptDialog]
en: Confirm Password input
target: Confirm New Password

[ctx: PromptDialog]
en: Current color order:
target: Current color:

[ctx: PromptDialog]
en: Emb shead
target: Emb head

[ctx: PromptDialog]
en: EmbNeedle:
target: Emb Needle bar:

[ctx: PromptDialog]
en: Nose Head:
target: Currect Head:

[ctx: PromptDialog]
en: Position:
target: Thread Clamp-Loosen Position:

[ctx: PromptDialog]
en: Trace offset
target: Stitch offset

[ctx: PromptDialog]
en: Trace offset data reset
target: Stitch offset data reset

[ctx: PromptDialog]
en: Trim
target: ThreadTrim

[ctx: PromptDialog]
en: Warrant
target: Authorize

[ctx: QObject]
en: Bottom thread disconnected
target: Bobbin thread disconnected

[ctx: QObject]
en: Change the bobbin
target: Bobbin change

[ctx: QObject]
en: Execute runnibng
target: Execute running

[ctx: QObject]
en: Expiration of use
target: Expired

[ctx: QObject]
en: Find zero success
target: Zeroing success

[ctx: QObject]
en: Head lifting timeout
target: Head lift timeout

[ctx: QObject]
en: None data
target: No data

[ctx: QObject]
en: Not allowed to work
target: Work-status Disable

[ctx: QObject]
en: Not in work status error
target: Disable working status

[ctx: QObject]
en: Prohibited frame moving state
target: Frame moving state Disable

[ctx: QObject]
en: Return to zero error
target: Zeroing error

[ctx: QObject]
en: The machine is in the state of replacing the bobbin
target: Machine is in the state of bobbins changing

[ctx: QObject]
en: Thread is broken
target: Thread breakage

[ctx: QObject]
en: Zero success
target: Zeroing success

[ctx: QObject]
en: change the bobbin
target: Bobbin Changing

[ctx: QObject]
en: safe area error
target: safe area intervene

[ctx: Quiembroidery]
en: Action
target: Control Action

[ctx: Quiembroidery]
en: Air pressure safety input allows
target: Air pressure safety input Enable

[ctx: Quiembroidery]
en: AllToZero
target: All zeroing

[ctx: Quiembroidery]
en: Automatic shuttle change alarm
target: ABC alarm

[ctx: Quiembroidery]
en: Automatically fix the stitch point
target: Auto Set emb start point

[ctx: Quiembroidery]
en: AxleJog
target: Main-shaft Jog

[ctx: Quiembroidery]
en: AxleRotate
target: Main-shaft Rotate

[ctx: Quiembroidery]
en: AxleTest
target: Main-shaft Test

[ctx: Quiembroidery]
en: Border
target: Simulate frame

[ctx: Quiembroidery]
en: BorderEmb
target: Border Emb

[ctx: Quiembroidery]
en: Bottom thread correction amount per stitch for flat embroidery
target: Flat Emb. bobbin thread correction amt. per stitch

[ctx: Quiembroidery]
en: Broken line stop
target: Thread-break stop

[ctx: Quiembroidery]
en: Carve hole needle
target: Boring needle

[ctx: Quiembroidery]
en: Carving hole offset
target: Boring offset-amt

[ctx: Quiembroidery]
en: Carving hole offset allows
target: Boring offset Enable

[ctx: Quiembroidery]
en: ChangeC
target: Manual Color-change

[ctx: Quiembroidery]
en: CheckFrame
target: Border check

[ctx: Quiembroidery]
en: Close
target: OFF

[ctx: Quiembroidery]
en: Collision continues
target: Oiling last time

[ctx: Quiembroidery]
en: Color
target: Color Sequence

[ctx: Quiembroidery]
en: Continuous angle of EMB movable frame
target: EMB frame-moving duration angle

[ctx: Quiembroidery]
en: Counting the number of shuttles for EMB
target: Flat emb. bobbin change counting

[ctx: Quiembroidery]
en: Current position:0;Starting point:2;Offset position:4
target: Current position:0;Start point:2;Offset position:4

[ctx: Quiembroidery]
en: CutPara
target: TrimPara

[ctx: Quiembroidery]
en: Delete
target: Delete Pattern

[ctx: Quiembroidery]
en: EMB Overhead board upgrade
target: EMB head board upgrade

[ctx: Quiembroidery]
en: EMB bottom thread length
target: EMB bobbin thread length

[ctx: Quiembroidery]
en: EMB hook contraction
target: EMB thread-hooking contraction

[ctx: Quiembroidery]
en: EMB hook test
target: EMB hookknife test

[ctx: Quiembroidery]
en: EMB jump needle change the number of frame
target: EMB jump-stitch frame-chaning stitches

[ctx: Quiembroidery]
en: EMB line broken return needles
target: EMB thread-break backward stitches qty

[ctx: Quiembroidery]
en: EMB needle and thread clamp allowed
target: EMB thread clamping of start-stitch Enable

[ctx: Quiembroidery]
en: EMB rock limit
target: EMB bar-drop limit

[ctx: Quiembroidery]
en: EMB set working area
target: EMB working area

[ctx: Quiembroidery]
en: EMB spindle find zero compensation
target: EMB spindle zero compensation

[ctx: Quiembroidery]
en: EMB static cut line completion angle
target: EMB static thread-trim completion angle

[ctx: Quiembroidery]
en: EMB the needle buckle line allowed
target: EMB thread-buckling of start-stitch Enable

[ctx: Quiembroidery]
en: EMB thread trimming allowed
target: EMB thread-trim Enable

[ctx: Quiembroidery]
en: Emb Disconnection detection prohibited
target: Emb thread-break detect. Disable

[ctx: Quiembroidery]
en: Emb lock type
target: Emb head-lock type

[ctx: Quiembroidery]
en: EmbHook
target: Emb Hook

[ctx: Quiembroidery]
en: Embroidery spindle circle
target: EMB spindle turns

[ctx: Quiembroidery]
en: Export
target: Pattern Export

[ctx: Quiembroidery]
en: FaceDetect
target: UpperDetect

[ctx: Quiembroidery]
en: Flat embroidery button line
target: EMB thread-buckle

[ctx: Quiembroidery]
en: Flat embroidery clip noodles
target: EMB upper thread-clamp

[ctx: Quiembroidery]
en: Flat embroidery color change timeout
target: EMB color change timeout

[ctx: Quiembroidery]
en: Flat embroidery cutter is not returning
target: EMB cutter not returns

[ctx: Quiembroidery]
en: Flat embroidery hook knife is not returning
target: EMB hook knife not returns

[ctx: Quiembroidery]
en: Flat embroidery lock
target: EMB head-lock

[ctx: Quiembroidery]
en: Flat embroidery needle position error
target: EMB needle position error

[ctx: Quiembroidery]
en: Flat embroidery oil
target: EMB oiling

[ctx: Quiembroidery]
en: Flat embroidery spindle
target: EMB spindle

[ctx: Quiembroidery]
en: FlatEmbroidery:
target: EMB:

[ctx: Quiembroidery]
en: GoOrBack
target: FW or BW

[ctx: Quiembroidery]
en: HeadEmb
target: Alternatehead

[ctx: Quiembroidery]
en: Hook knife detection allows
target: Hook knife detection Enable

[ctx: Quiembroidery]
en: Imposity 1 speed limit
target: Needle 1 speed limit

[ctx: Quiembroidery]
en: Imposity 2 speed limit
target: Needle 2 speed limit

[ctx: Quiembroidery]
en: Imposity 3 speed limit
target: Needle 3 speed limit

[ctx: Quiembroidery]
en: Imposity 4 speed limit
target: Needle 4 speed limit

[ctx: Quiembroidery]
en: InternetofThings  configuration
target: IoT configuration

[ctx: Quiembroidery]
en: Iterative way
target: Repeat Mode

[ctx: Quiembroidery]
en: Jump stitch overrun distance
target: Frame-changing distance of jump-stitch

[ctx: Quiembroidery]
en: Lead Type
target: Thread-Tension Base

[ctx: Quiembroidery]
en: Light curtain safety input allowed
target: Light curtain safety input Enable

[ctx: Quiembroidery]
en: LineEmb
target: Position line embroidery

[ctx: Quiembroidery]
en: LineOffset
target: StitchOffset

[ctx: Quiembroidery]
en: Lock needle step size
target: Lock stitch length

[ctx: Quiembroidery]
en: Lock needle steps
target: Locking stitches

[ctx: Quiembroidery]
en: Lock needle times
target: Stitch-locking times

[ctx: Quiembroidery]
en: Machine head board bus detection
target: Headboard bus detection

[ctx: Quiembroidery]
en: MateEmb
target: FabricEmb

[ctx: Quiembroidery]
en: Maximum acceleration limit of EMB movable frame
target: Max. acceleration limit of EMB frame-moving

[ctx: Quiembroidery]
en: Maximum speed limit of EMB movable frame
target: Max. speed limit of EMB frame-moving

[ctx: Quiembroidery]
en: Maximum speed of EMB spindle
target: Max.speed of EMB spindle

[ctx: Quiembroidery]
en: Maximum spindle speed of EMB stitch skipping
target: Max. spindle speed of stitch jumping

[ctx: Quiembroidery]
en: Mending embroidery is complete
target: Mending embroidery done

[ctx: Quiembroidery]
en: Modify the first level password
target: Modify level 1 password

[ctx: Quiembroidery]
en: MoveBorder
target: Quantitative frame moving

[ctx: Quiembroidery]
en: Moving frame direction of EMB trimming
target: Frame direction when EMB thread-trim

[ctx: Quiembroidery]
en: Moving frame displacement of EMB trimming
target: Frame-moving displacement when EMB thread-trim

[ctx: Quiembroidery]
en: Needle index 1
target: Stitches index 1

[ctx: Quiembroidery]
en: Needle index 1 move distance
target: Stitches index 1 move distance

[ctx: Quiembroidery]
en: Needle index 10
target: Stitches index 10

[ctx: Quiembroidery]
en: Needle index 10 move distance
target: Stitches index 10 move distance

[ctx: Quiembroidery]
en: Needle index 2
target: Stitches index 2

[ctx: Quiembroidery]
en: Needle index 2 move distance
target: Stitches index 2 move distance

[ctx: Quiembroidery]
en: Needle index 3
target: Stitches index 3

[ctx: Quiembroidery]
en: Needle index 3 move distance
target: Stitches index 3 move distance

[ctx: Quiembroidery]
en: Needle index 4
target: Stitches index 4

[ctx: Quiembroidery]
en: Needle index 4 move distance
target: Stitches index 4 move distance

[ctx: Quiembroidery]
en: Needle index 5
target: Stitches index 5

[ctx: Quiembroidery]
en: Needle index 5 move distance
target: Stitches index 5 move distance

[ctx: Quiembroidery]
en: Needle index 6
target: Stitches index 6

[ctx: Quiembroidery]
en: Needle index 6 move distance
target: Stitches index 6 move distance

[ctx: Quiembroidery]
en: Needle index 7
target: Stitches index 7

[ctx: Quiembroidery]
en: Needle index 7 move distance
target: Stitches index 7 move distance

[ctx: Quiembroidery]
en: Needle index 8
target: Stitches index 8

[ctx: Quiembroidery]
en: Needle index 8 move distance
target: Stitches index 8 move distance

[ctx: Quiembroidery]
en: Needle index 9
target: Stitches index 9

[ctx: Quiembroidery]
en: Needle index 9 move distance
target: Stitches index 9 move distance

[ctx: Quiembroidery]
en: Needle skipping mode
target: Frame-changing mode of jump-stitch

[ctx: Quiembroidery]
en: Needle speed limit allows
target: Needle speed limit Enable

[ctx: Quiembroidery]
en: Needles for detection of EMB bottom thread breakage
target: EMB bobbin thread-break detected stitches

[ctx: Quiembroidery]
en: Needles for detection of EMB thread breakage
target: EMB upper thread-break detected stitches

[ctx: Quiembroidery]
en: Needles is not detected when the EMB bottom thread
target: No stitches detect. when EMB bobbin thread starts

[ctx: Quiembroidery]
en: Needles is not detected when the EMB thread
target: No stitches detect. when EMB upper thread starts

[ctx: Quiembroidery]
en: Needles to end ahead of time
target: Mending Advance Ending Stitches

[ctx: Quiembroidery]
en: No:0;Automatic thread:1;Final:2;Data:3
target: NoTrim:0;AutoTrim:1;FinalTrim:2;DataTrim:3

[ctx: Quiembroidery]
en: No:0;Delay Reminder:1;Piece count:2;Immediately by length:3
target: No:0;Length Count DelayRemind:1;Piece count:2;Length Count ImmedRemind:3

[ctx: Quiembroidery]
en: No:0;Left:1;Forward:2;Right:3;Backward:4
target: NoMoving:0;Left:1;Forward:2;Right:3;Backward:4

[ctx: Quiembroidery]
en: No:0;Manual:1;Auto:2;All:3
target: NoMending:0;Manual:1;Auto:2;All:3

[ctx: Quiembroidery]
en: No:0;Work times:1;Work needles:2;Keep refueling:3
target: NoOiling:0;Work hours:1;Work stitches:2;Keep oiling:3

[ctx: Quiembroidery]
en: Nose number
target: Head number

[ctx: Quiembroidery]
en: Number of EMB heads
target: Nos of EMB heads

[ctx: Quiembroidery]
en: Number of machine heads
target: Nos of machine heads Error

[ctx: Quiembroidery]
en: Number of needles per head for EMB
target: Nos of needles per EMB head

[ctx: Quiembroidery]
en: Number of slow motion stitches for EMB stitch
target: EMB. start slow motion stitches

[ctx: Quiembroidery]
en: Number of traverses
target: Nos of traverses

[ctx: Quiembroidery]
en: Offset point X allowed
target: Offset point X Enable

[ctx: Quiembroidery]
en: Offset point Y allowed
target: Offset point Y Enable

[ctx: Quiembroidery]
en: Offset point coordinate valid flag
target: Valid offfset point coordinate

[ctx: Quiembroidery]
en: Oil
target: Manual Oiling

[ctx: Quiembroidery]
en: Oil mode selection
target: Oiling modes

[ctx: Quiembroidery]
en: Open
target: ON

[ctx: Quiembroidery]
en: Parking location selection after completion
target: Parking location after completion

[ctx: Quiembroidery]
en: PatchEmb
target: AppliqueEmb

[ctx: Quiembroidery]
en: Production preset
target: Output preset

[ctx: Quiembroidery]
en: Read the head board parameter error
target: Headboard parameter read error

[ctx: Quiembroidery]
en: Refueling gas storage
target: Oiling and Air storage time

[ctx: Quiembroidery]
en: Refueling needle interval
target: Oiling Stitches interval

[ctx: Quiembroidery]
en: Refueling times interval
target: Oiling time interval

[ctx: Quiembroidery]
en: RodPosition
target: Needle bar Position

[ctx: Quiembroidery]
en: Root
target: Super User

[ctx: Quiembroidery]
en: Rotation angle
target: Rotate Angle

[ctx: Quiembroidery]
en: SetStart
target: Setembstartpoint

[ctx: Quiembroidery]
en: Signal
target: Sensor Signal

[ctx: Quiembroidery]
en: Software
target: Software setting

[ctx: Quiembroidery]
en: Spindle manual movement speed
target: Spindle manual moving speed

[ctx: Quiembroidery]
en: Spindle return to zero speed
target: Spindle zeroing speed

[ctx: Quiembroidery]
en: Spindle speed of EMB
target: EMB working speed

[ctx: Quiembroidery]
en: Spindle speed of embroidery
target: EMB spindle speed

[ctx: Quiembroidery]
en: Spindle start and stop speed
target: Spindle start-stop speed

[ctx: Quiembroidery]
en: Start slow speed of EMB spindle
target: EMB starting spindle slow-moving speed

[ctx: Quiembroidery]
en: StitchesNum:0;Distance:1
target: Stitches:0;Distance:1

[ctx: Quiembroidery]
en: Supplementary embroidery
target: Mending embroidery

[ctx: Quiembroidery]
en: The embroidery spindle is not in the zero position
target: Embroidery spindle is not in the zero position

[ctx: Quiembroidery]
en: The gear ratio of plain emb spindle is normal
target: Flat emb. spingle gear ratio is normal

[ctx: Quiembroidery]
en: Tracking rope EMB needle position
target: TracingCording needle position

[ctx: Quiembroidery]
en: Tracking rope EMB speed
target: TracingCording speed

[ctx: Quiembroidery]
en: Tracking rope embroidery alarm
target: TracingCording alarm

[ctx: Quiembroidery]
en: TraverseAlone:1;TraverseAll:2
target: SingleTraverse:1;AllTraverse:2

[ctx: Quiembroidery]
en: Trim
target: ThreadTrim

[ctx: Quiembroidery]
en: UnderDetect
target: BobbinDetect

[ctx: Quiembroidery]
en: Universal lead:0;Richpeace Lead:1
target: II-tensionbase:0;III-tensionbase:1

[ctx: Quiembroidery]
en: UsualRepeat:0;XSymmetry:1;YSymmetry:2;XYSymmetry:3
target: UsualRepeat:0;XSymmetry:1;YSymmetry:2;XYSymmetry:3;UsualByColor:4;XColor:5;YColor:6;XYColor:7

[ctx: Quiembroidery]
en: X direction magnification
target: X- magnification

[ctx: Quiembroidery]
en: X repetition space
target: X repetition interval

[ctx: Quiembroidery]
en: X repetition times
target: Nos of repetitions (X)

[ctx: Quiembroidery]
en: X to move motor
target: X moving motor

[ctx: Quiembroidery]
en: XY dry running speed
target: XY no-load running speed

[ctx: Quiembroidery]
en: XY start and stop speed
target: XY start-stop speed

[ctx: Quiembroidery]
en: XY zero return speed
target: XY zeroing running speed

[ctx: Quiembroidery]
en: Y direction magnification
target: Y-magnification

[ctx: Quiembroidery]
en: Y repetition space
target: Y repetition interval

[ctx: Quiembroidery]
en: Y repetition times
target: Nos of repetitions (Y)

[ctx: Quiembroidery]
en: Y to move motor
target: Y moving motor

[ctx: Quiembroidery]
en: Zero
target: Zeroing

[ctx: Quiembroidery]
en: limit XY movement
target: XY movement limit

[ctx: Quiembroidery]
en: open box button 1
target: Frame-open button 1

[ctx: Quiembroidery]
en: open box button 2
target: Frame-open button 2

[ctx: Quiembroidery]
en: open box button 3
target: Frame-open button 3

[ctx: Quiembroidery]
en: open box button 4
target: Frame-open button 4

[ctx: Quiembroidery]
en: open box button 5
target: Frame-open button 5

[ctx: Quiembroidery]
en: open box button 6
target: Frame-open button 6

[ctx: Quiembroidery]
en: open box button 7
target: Frame-open button 7

[ctx: Quiembroidery]
en: open box button 8
target: Frame-open button 8

[ctx: Quiembroidery]
en: xy manual movement speed 1
target: xy manual moving speed 1

[ctx: Quiembroidery]
en: xy manual movement speed 2
target: xy manual moving speed 2

[ctx: Quiembroidery]
en: xy manual movement speed 3
target: xy manual moving speed 3

[ctx: SheetWidget]
en: Whether to recover the default parameters for the frame angle?
target: Whether to recover the frame-moving angel default parameters?

[ctx: SystemManageDialog]
en: *Before setting the static IP, you need to first set the dynamic IP. After the dynamic IP is set, you need to return to this interface to continue setting the static IP
target: *Set the dynamic IP before setting the static IP, then return to set static IP

[ctx: SystemManageDialog]
en: CHENILLE
target: Chenille

[ctx: SystemManageDialog]
en: CHENILLE DOWN
target: Chenille DOWN

[ctx: SystemManageDialog]
en: COIL
target: Coiling

[ctx: SystemManageDialog]
en: Do you want to clear the journal?
target: Whether to clear the log file?

[ctx: SystemManageDialog]
en: Do you want to clear the production statistics?
target: Whether to clear the production statistics?

[ctx: SystemManageDialog]
en: Do you want to export journal?
target: Whether to export journal?

[ctx: SystemManageDialog]
en: Head board
target: Head board(HB)

[ctx: WordsInputDialog]
en: old
target: old name
