CAMS协议适配

README.md

@@ -1,12 +1,12 @@
 ## CAMS DATU ：CAMS计算机辅助缝纫管理系统采集模块
 
+
 #### 说明
 
 - 待完成
 
   RS232协议（未指定）
 
-  发送数据信息（未指定格式）
 
 - 已完成
 
@@ -26,6 +26,8 @@
   
   9.命令输出指定log用于调试
   
+ 10 .适配协议CAMS协议，解析与发送（指令接收后具体事项还未确定）
+
 #### 开发环境
 
 RT-Thread 软件打开 [点击下载](https://www.rt-thread.org/download.html#download-rt-thread-studio "点击下载")，版本: 2.2.7、C 语言
@@ -52,7 +54,7 @@ RT-Thread 软件打开 [点击下载](https://www.rt-thread.org/download.html#do
 | fram   | 读写flash，用以保存读取配置      |
 | IO     | 端口电平等                       |
 | OLED   | 屏幕                             |
-| modbus | modbus 功能                      |
+| modbus | modbus 功能，CAMS协议适配                      |
 | thread | 线程管理                         |
 | LTE    | 网络配置                         |
 | ADC    | ADC读值转换0-10V、3.3V、4-20ma等 |
@@ -77,6 +79,7 @@ RT-Thread 软件打开 [点击下载](https://www.rt-thread.org/download.html#do
 |  log_lte |  4G与mqtt的log |
 |  log_moddbus |  modbus的log |
 |  log_adc | adc的log  |
+|  log_datu | datu协议栈收发的log  |
 |  no_log | 关闭log  |
 |  IO_key < 0-8 > < 1  0 >|  指定输出端口改变电平  |
 

applications/ADC/adc.c

@@ -63,7 +63,9 @@ void adc_read()
      * 外部电压  = （vout - 0.2）* 6.8 / 2
      *
      * 4-20ma vin = i * 150
-     *   外部电流 = （vout - 0.2）* 6.8 / 2 / 150
+     *   外部电流 = （vout）* 6.8 / 2 / 150
+     *
+     *
      */
 
     ADC.ADC1_0_value = rt_adc_read(adc1_dev, ADC1_CHANNEL_0); //读取采样值
@@ -77,7 +79,7 @@ void adc_read()
     }
     else if (ADC.ADC1_mode == 2)
     {
-        ADC.ADC1_0_Current = (rt_uint16_t) (((float) ADC.ADC1_0_vol / 100 - 0.2) / 150 * 340);
+        ADC.ADC1_0_Current = (rt_uint16_t) (((float) ADC.ADC1_0_vol / 100 ) / 150 * 340);
     }
 
     if (ADC.log)
@@ -96,7 +98,7 @@ void adc_read()
     }
     else if (ADC.ADC2_mode == 2)
     {
-        ADC.ADC2_4_Current = (rt_uint16_t) (((float) ADC.ADC2_4_vol / 100 - 0.2) / 150 * 340);
+        ADC.ADC2_4_Current = (rt_uint16_t) (((float) ADC.ADC2_4_vol / 100 ) / 150 * 340);
     }
 
     if (ADC.log)

applications/Modbus/DATU.c

@@ -0,0 +1,256 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2024-05-16     lijian       the first version
+ */
+#include <DATU.h>
+#define POLY 0x1021  // CRC-16-CCITT多项式
+
+DATU_t DATU;
+
+rt_uint16_t CRC16_Calculate(rt_uint8_t *data, rt_uint8_t len)
+{
+    rt_uint16_t CRC16in = 0xFFFF;
+    rt_uint16_t CPoly = 0xA001; /*0x8005高低位交换*/
+
+    while (len--)
+    {
+        CRC16in ^= *(data++);
+        for(rt_uint8_t i = 0;i < 8;i++)
+        {
+            if(CRC16in & 0x01)
+                CRC16in = (CRC16in >> 1) ^ CPoly;
+            else
+                CRC16in = CRC16in >> 1;
+        }
+    }
+
+    CRC16in = CRC16in % 256 * 256 + CRC16in / 256; /*调换高低Byte*/
+
+    return (CRC16in);
+}
+
+
+rt_uint8_t read_cmd(rt_uint8_t read_buf[], rt_uint8_t read_len)
+{
+
+    uint8_t correct_header[] = { 0x44, 0x41, 0x54, 0x55 };
+
+    if (memcmp(read_buf, correct_header, sizeof(correct_header)) == 0){
+
+        if (read_buf[4] == 0x03) {
+            return 3;
+        }
+        else if (read_buf[4] == 0x06){
+            return 6;
+        }
+        else{
+            return -2;
+        }
+    }
+    else{
+        return -1;
+
+    }
+
+}
+
+
+
+void datu_init()
+{
+    rs485_inst_t *hinst = rs485_create(RS485_SAMPLE_MASTER_SERIAL, RS485_SAMPLE_MASTER_BAUDRATE,
+    RS485_SAMPLE_MASTER_PARITY, RS485_SAMPLE_MASTER_PIN, RS485_SAMPLE_MASTER_LVL);
+
+    if (hinst == RT_NULL)
+    {
+        rt_kprintf("create rs485 instance fail.\n");
+        return;
+    }
+
+    rs485_set_recv_tmo(hinst, 1000);
+    if (rs485_connect(hinst) != RT_EOK)
+    {
+        rs485_destory(hinst);
+        rt_kprintf("rs485 connect fail.\n");
+        return;
+    }
+
+    //    rt_kprintf("Running.");
+    rt_int8_t send_len;
+//     rt_uint8_t send_buf[128];
+    rt_uint8_t send_buf[16] = { 'D', 'A', 'T', 'U', 0x01, 0x02, 0x03, 0x04, 0x05 };
+    rt_uint8_t read_buf[10];
+    rt_int8_t read_len;
+    rt_uint8_t i;
+    rt_int8_t rc;
+    while (1)
+    {
+
+        /** 数据识别序列                                           数据内容                                                      校验字
+         44 41 54 55   00 00 00 00   00 00     00 00    00 00    CRC
+         B0,B1,B2,B3   B4--B7        B8,B9    B10,B11  B12,B13   B14,B15
+         D, A, T, U    主轴针数                   面线1张力值    面线2张力值   传感器状态     B4--B13的16位CRC
+         *
+         */
+        rt_thread_mdelay(100);
+
+        // || 有针数
+         if (DATU.send_data ) {
+             rt_uint16_t crc = CRC16_Calculate(send_buf + 4, 10);
+//             rt_kprintf("CRC %x\n ", crc);
+             send_buf[14] = crc >> 8;
+             send_buf[15] = crc & 0xFF;
+             send_len = rs485_send(hinst, (void *) send_buf, sizeof(send_buf));
+             DATU.send_data =0;
+        }
+
+        if (DATU.log)
+        {
+            rt_kprintf("rs485 send %d datas : ", send_len);
+            for (i = 0; i < send_len; i++)
+            {
+                rt_kprintf("%02X ", send_buf[i]);
+            }
+
+            rt_kprintf("\n");
+            send_len = 0;
+
+        }
+
+//        read_len = rs485_send_then_recv(hinst, (void *) send_buf, sizeof(send_buf), read_buf, sizeof(read_buf));
+
+        read_len = rs485_recv(hinst, (void *) read_buf, sizeof(read_buf));
+
+        if (read_len < 0)
+        {
+            if (DATU.log)
+            {
+                rt_kprintf("rs485 read datas error.\n");
+            }
+            continue;
+        }
+        else if (read_len == 0)
+        {
+            if (DATU.log)
+            {
+                rt_kprintf("rs485 read timeout.\n");
+            }
+            continue;
+        }
+
+        //read_buf[read_len] = 0;
+
+
+
+        if (DATU.log)
+        {
+            rt_kprintf("rs485 read %d datas : ", read_len);
+            for (i = 0; i < read_len; i++)
+            {
+                rt_kprintf("%2X ", read_buf[i]);
+            }
+
+            rt_kprintf("\n");
+
+        }
+
+
+        //CRC校验
+        rt_uint16_t received_crc = (read_buf[7] << 8) | read_buf[8];
+        rt_kprintf("CRC %x\n ", received_crc);
+        rt_uint16_t calculated_crc = CRC16_Calculate(read_buf+4, 3);
+        rt_kprintf("CRC %x\n ", calculated_crc);
+        if (calculated_crc == received_crc) {
+            if (DATU.log)
+            {
+                rt_kprintf("read datas CRC OK\n");
+            }
+        } else {
+            if (DATU.log)
+            {
+                rt_kprintf("read datas CRC ERR\n");
+            }
+            continue;
+        }
+
+        rc = read_cmd(read_buf, read_len);
+
+        if (rc == -1)
+        {
+            if (DATU.log)
+            {
+                rt_kprintf("read header is not DATU.\n");
+            }
+            continue;
+        }
+        else if (rc == -2)
+        {
+            if (DATU.log)
+            {
+                rt_kprintf("read cmd is not 0x03 / 0x06.\n");
+            }
+            continue;
+        }
+        else if (rc == 3)
+        {
+            if (DATU.log)
+            {
+                rt_kprintf("read cmd is 0x03.\n");
+            }
+            DATU.send_data =1;
+            continue;
+        }
+        else if (rc == 6)
+        {
+            if (DATU.log)
+            {
+                rt_kprintf("read cmd is 0x06.\n");
+                rt_kprintf("read cmd is %d .\n",read_buf[6]);
+            }
+
+            switch (read_buf[6]) {
+                case 1:
+                    //主轴针数清零
+                    break;
+                case 2:
+                    //闪灯
+//                    IO_key(1, argv);
+                    break;
+                case 3:
+                    //开锁1
+                    break;
+                case 4:
+                    //开锁2
+                    break;
+                case 5:
+                    //开锁3
+                    break;
+                case 6:
+                    //报警灯开
+                    break;
+                case 7:
+                    //报警灯关
+                    break;
+                default:
+                    break;
+            }
+
+
+        }
+
+    }
+
+}
+
+
+
+void set_DATU_log(rt_uint8_t log)
+{
+    DATU.log = log;
+}
+

applications/Modbus/DATU.h

@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2024-05-16     lijian       the first version
+ */
+#ifndef APPLICATIONS_MODBUS_DATU_H_
+#define APPLICATIONS_MODBUS_DATU_H_
+
+#include <rtthread.h>
+#include <drv_common.h>
+#include <rtdevice.h>
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <stdint.h>
+#include <rs485.h>
+
+
+typedef struct
+{
+    rt_uint8_t send_data;//发送数据
+    rt_uint8_t log; //log
+} DATU_t;
+
+void datu_init();
+void set_DATU_log(rt_uint8_t log);
+
+#endif /* APPLICATIONS_MODBUS_DATU_H_ */

applications/OLED/gui.c

@@ -252,23 +252,23 @@ void Menu3_485()
 {
 //    char buf[4];
     ssd1306_FillArea(0, 18, 128, 46, Black);
-    ssd1306_SetCursor(2, 20);
+//    ssd1306_SetCursor(2, 20);
-    ssd1306_WriteString("addr:", Font_7x10, White);
+//    ssd1306_WriteString("addr:", Font_7x10, White);
-    ssd1306_SetCursor(55, 20);
+//    ssd1306_SetCursor(55, 20);
-    rt_sprintf(buf, "0x%2d", get_Modbus_Addr());
+//    rt_sprintf(buf, "0x%2d", get_Modbus_Addr());
-    ssd1306_WriteString(buf, Font_6x8, White);
+//    ssd1306_WriteString(buf, Font_6x8, White);
-
+//
-    ssd1306_SetCursor(2, 32);
+//    ssd1306_SetCursor(2, 32);
-    ssd1306_WriteString("reg:", Font_7x10, White);
+//    ssd1306_WriteString("reg:", Font_7x10, White);
-    ssd1306_SetCursor(55, 32);
+//    ssd1306_SetCursor(55, 32);
-    rt_sprintf(buf, "0x%2d", get_Modbus_Reg_Addr());
+//    rt_sprintf(buf, "0x%2d", get_Modbus_Reg_Addr());
-    ssd1306_WriteString(buf, Font_6x8, White);
+//    ssd1306_WriteString(buf, Font_6x8, White);
-
+//
-    ssd1306_SetCursor(2, 44);
+//    ssd1306_SetCursor(2, 44);
-    ssd1306_WriteString("r_num:", Font_7x10, White);
+//    ssd1306_WriteString("r_num:", Font_7x10, White);
-    ssd1306_SetCursor(55, 44);
+//    ssd1306_SetCursor(55, 44);
-    rt_sprintf(buf, "0x%2d", get_Modbus_Reg_Num());
+//    rt_sprintf(buf, "0x%2d", get_Modbus_Reg_Num());
-    ssd1306_WriteString(buf, Font_6x8, White);
+//    ssd1306_WriteString(buf, Font_6x8, White);
 
     ssd1306_UpdateScreenArea(0, 18, 128, 46);
 }
@@ -341,7 +341,7 @@ rt_uint8_t key_Value(void)
     {
         if (rt_pin_read(key_pins[var]) == PIN_LOW)
         {
-            rt_kprintf("%d\n", var);
+         //   rt_kprintf("%d\n", var);
             return var + 1;
         }
     }
@@ -404,7 +404,7 @@ void oled_menu()
     }
 
     menu = menu_table[menu_index].menu;
-    rt_kprintf("index %d\n", menu_index);
+    //rt_kprintf("index %d\n", menu_index);
     (*menu)();
 }
 

applications/OLED/gui.h

@@ -21,7 +21,7 @@
 #include <LTE.h>
 #include <mb85rs.h>
 #include <gui.h>
-#include <modbus_rtu.h>
+//#include <modbus_rtu.h>
 #include <mqtt.h>
 #include <adc.h>
 #include <inout.h>

applications/config/console.c

@@ -577,15 +577,21 @@ void log_adc()
     set_ADC_log(1);
 }
 
+void log_datu()
+{
+    set_DATU_log(1);
+}
+
 void no_log()
 {
-
+    set_DATU_log(0);
     set_modbus_log(0);
     set_LTE_log(0);
     set_mqtt_log(0);
     set_ADC_log(0);
 }
 
+MSH_CMD_EXPORT(log_datu, save to flash);
 MSH_CMD_EXPORT(change_config, save to flash);
 MSH_CMD_EXPORT(log_modbus, view_log to console);
 MSH_CMD_EXPORT(log_lte, view_log to console);

applications/config/console.h

@@ -18,6 +18,7 @@
 #include <adc.h>
 #include <mqtt.h>
 #include "modbus_rtu.h"
+#include <DATU.h>
 
 //读取配置
 void read_config();

applications/thread/thread.c

@@ -135,7 +135,8 @@ static void Task_485(void *parameter)
 {
     while (1)
     {
-        Modbus_init();
+        //Modbus_init();
+        datu_init();
         rt_thread_mdelay(100);
     }
 }

applications/thread/thread.h

@@ -17,7 +17,8 @@
 #include <LTE.h>
 #include <mb85rs.h>
 #include <gui.h>
-#include <modbus_rtu.h>
+//#include <modbus_rtu.h>
+#include <DATU.h>
 #include <console.h>
 #include <mqtt.h>
 #include <adc.h>